DMC SD 30 CS 110
Bandsaw
• Rubber coated pressing rollers before and after working unit • 1 HP two speed feed unit. Feed speeds set at 15 or 30 feet per minute • Y-Delta two-stage reduced voltage starter on main motor • 2 roller Infeed and outfeed table extensions • Automatic Electronic Table Positioning Device • Adjustable sanding drum and pad position for micro precision adjustment • Electronic digital thickness readout of work table position • Powered table lifting by means of four heavy duty motor and lifting columns double fastened at both top and bottom of the lifting columns to provide exceptional table stability • Electronic tracking of abrasive belt • Automatic feed mat tracking • Pneumatic belt tensioning with center fulcrum to compensate for tapering of abrasive belt • Front and rear emergency stop buttons • Automatic emergency stop of machine for: - sanding belt breaking, tensioning, over tracking - opening of the access door to the operating groups - absence of compressed air - overload on main motors • Amperage meter for main motors allows maximum utilization of available horsepower • Main disconnect switch with the ability to be locked out by padlock • In feed flexible steel hold down, and anti-kickback plate • 50 shore, negative profile (waffle style) rubber feed mat • LOGIC 50 K Electronic Programmer for timing/anti-dubbing • of the pad
Built for Precision and Reliability
- Heavy-duty cast iron construction
- Precision and reliability
- Ideal for professional workshops
Key Specifications
| Motor Power | 3 HP (2.2 kW) |
|---|---|
| Wheel Diameter | 18" (460 mm) |
| Cutting Height | 12" (305 mm) |
| Cutting Width | 18" (460 mm) |
| Table Size | 21" x 19" (535 x 480 mm) |
| Blade Dimensions | 136" x 3/8" (3450 x 10 mm) |
| Dust Extraction | 100 mm (4") |
| Weight | 330 lbs (150 kg) |
Technical Specifications
| Motor Power | 3 HP (2.2 kW) |
|---|---|
| Wheel Diameter | 18" (460 mm) |
| Cutting Height | 12" (305 mm) |
| Cutting Width | 18" (460 mm) |
| Table Size | 21" x 19" (535 x 480 mm) |
| Blade Dimensions | 136" x 3/8" (3450 x 10 mm) |
| Dust Extraction | 100 mm (4") |
| Weight | 330 lbs (150 kg) |
No reviews yet. Bought this machine from Allwood? Tell us how it performs in your shop.
Contact Us