All Products

SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch. UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. 

SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch. UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. Poly v-ribbed belts reduce vibration and help ensure a great cut. Table flatness is measured diagonally at 0. 010” maximum gap. RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe. CONFIGURABILITY: Over 150 unique configurations, makes the Contractor Saw the most configurable SawStop saw. Adding a mobile base, sliding crosscut table or router table, are just a few of the ways to make this your ideal saw. UNIVERSAL PERFORMANCE: The Contractor Saw offers versatility, reliability and safety for a variety of users. The cast iron table top (Cast Iron Wing Assembly, CNS-CIWA, sold separately) creates a better-than-hybrid performance in the shop at an affordable price. 36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection. • Horsepower 1.75hp • Phase 1 phase • Voltage 110v

The electro mechanical cabinet clamp action e is the solution for the assembly of cabinets. Intuitive and easy to use. This semiautomatic machine is suitable for all cabinet manufacturers, with low productive volumes (up to 30 cabinets/shift).

The electro mechanical cabinet clamp action p is the solution for the assembly of cabinets. The automatic set-up allows to a simple use of the clamp. This automatic machine is suitable for all cabinet manufacturers, with medium productive volumes (up to 50 cabinets/shift).

Main configurations: 160 tons of three-layer hot press technical parameters: Hot plate size: 2500✘1300mm height 100mm*42mm Nominal pressure: 160 tons Number of hot plates: 3 sheets Spacing between layers: 100mm Hydraulic station power: 7kw Heating power: 36kw Hydraulic oil model: Heat transfer oil temperature: 180-200°C Equipment weight: about 8 tons Size: width 1700✘ length 3800✘2200 (height) mm

The Class TF 130PS is the workhorse of the SCM shaper line. It has a very robust structure and all the controls can be accessed on the front of the machine for easy use. An integrated sliding table further increases the flexibility of this machine. A mechanical digital reader ensures the precision of the spindle adjustment. 3ph/ 220V 11HP fixed 1 1/4 MK5 interchangeable spindle 5-speed Aluminum fence w/ mechanical adjustment Sliding table Tenoning kit

A must for the serious woodworker, the Class TF 130 is the SCM shaper that combines quality and value for your investment. It has a very robust structure and all the controls can be accessed on the front of the machine for easy use. A mechanical digital readout ensures the precision of the spindle adjustment. 3ph /220V 11 HP Fixed 1 1/4 " MK 5 interchangeable spindle 5-speed aluminum fence w/ mechanical adjustments

Heavy Duty  Tilting Spindle Shaper

10 HP, 5000 CFM The SHK Series enclosureless dust collector is designed for the collection of sawdust and is ideal for indoor use in smaller wood shops, or for more localized extraction dedicated to specific woodworking machinery. The optional mechanical shaker cleaning system increases production time by reducing labor required to maintain filter efficiency. The bags can be mechanically shaken after the fan is switched off (per NFPA guidelines). The filter housing supports anti-static polyester filter sleeves fixed by double snap rings into a tube sheet, which is mounted atop the material collection hopper that empties the collected material into plastic bags. The collector frame is made of durable 14 GA galvanized sheet steel. The material handling fan is rated for S1 duty cycle (continuous running), and features a high-efficiency IP55 motor. The SHK Series collector is available with several waste discharge options: Hopper and waste bags (standard, as shown). Haul-away forklift dump bin. Waste barrels with viewing windows. Collection hopper with rotary screw extractor and rotary air lock (leg extensions available for additional clearance below discharge). Closed-loop material transfer system including rotary screw extractor, rotary air lock, material transfer fan and material transfer ductwork. Enclosure panels are available for locating SHK Series units outdoors. All SHK Series units are capable of retrofit for locating outdoors. Additional safety equipment is available for spark detection & extinguishing, deflagration relief & containment, and abort for return air applications.

7.5 HP, 3600 CFM The SHK Series enclosureless dust collector is designed for the collection of sawdust and is ideal for indoor use in smaller wood shops, or for more localized extraction dedicated to specific woodworking machinery. The optional mechanical shaker cleaning system increases production time by reducing labor required to maintain filter efficiency. The bags can be mechanically shaken after the fan is switched off (per NFPA guidelines). The filter housing supports anti-static polyester filter sleeves fixed by double snap rings into a tube sheet, which is mounted atop the material collection hopper that empties the collected material into plastic bags. The collector frame is made of durable 14 GA galvanized sheet steel. The material handling fan is rated for S1 duty cycle (continuous running), and features a high-efficiency IP55 motor. The SHK Series collector is available with several waste discharge options: Hopper and waste bags (standard, as shown). Haul-away forklift dump bin. Waste barrels with viewing windows. Collection hopper with rotary screw extractor and rotary air lock (leg extensions available for additional clearance below discharge). Closed-loop material transfer system including rotary screw extractor, rotary air lock, material transfer fan and material transfer ductwork. Enclosure panels are available for locating SHK Series units outdoors. All SHK Series units are capable of retrofit for locating outdoors. Additional safety equipment is available for spark detection & extinguishing, deflagration relief & containment, and abort for return air applications.

About this machine: 37″ Wide machine Combination head with 4.75″ diameter, 85 shore rubber contact drum and 2″ wide platen 18 HP main motor for sanding unit 0.7 HP, 2-speed feed motor (15 and 30 FPM) 6.25″ Maximum workpiece thickness Uses 37″ x 60″ abrasive belts Accurate and reliable electronic tracking of abrasive belt Pneumatic belt tensioning with center fulcrum to compensate for tapering of abrasive belt Powered table positioning with electronic digital readout Automatic thickness setting device Rubber coated pressure rolls before and after sanding unit Infeed and outfeed tables with (2) rollers each 50 Shore negative profile (waffle pattern) rubber feed mat Automatic emergency stop of machine for: Sanding belt breaking, tensioning, overtracking; Absence of compressed air; overload on main motor (2) Platens provided – (1) Rigid, (1) Soft Air requirements: 6 Bar (88 PSI) Dust requirements: 900 CFM Electrical requirements: 54 Amps @ 230 V, 3 Phase

About The Machine: • 37″ Wide machine • Combination head with 4.75″ diameter, 85 shore rubber contact drum and 2″ wide platen • 18 HP main motor for sanding unit • 0.7 HP, 2-speed feed motor (15 and 30 FPM) • 6.25″ Maximum workpiece thickness • Uses 37″ x 60″ abrasive belts • Accurate and reliable electronic tracking of abrasive belt • Pneumatic belt tensioning with center fulcrum to compensate for tapering of abrasive belt • Powered table positioning with electronic digital readout • Automatic thickness setting device • Rubber coated pressure rolls before and after sanding unit • Infeed and outfeed tables with (2) rollers each • 50 Shore negative profile (waffle pattern) rubber feed mat • Automatic emergency stop of machine for: Sanding belt breaking, tensioning, overtracking; Absence of compressed air; overload on main motor • (2) Platens provided – (1) Rigid, (1) Soft • Air requirements: 6 Bar (88 PSI) • Dust requirements: 900 CFM • Electrical requirements: 54 Amps @ 230 V, 3 Phase

Machine Specs: • Worktable Dimension: 600mm x 885mm • Cast Iron Saw Wheels Diameter: 640mm • Saw Wheel Width: 38mm • Maximum Cutting Height: 600mm (24″) • Maximum Cutting Width: 620mm • Worktable Tilting (CE): 0° – 45° (20°) • Exhaust Outlet Diameter: N° 2mm x 120mm • Voltage: 220V 1-phase, 4.8hp, 25.2″ flywheels dia. , 23.6″ resaw height, 24.4″ cutting width, 204″ recommended blade length, .25″ – 1.5″ blade

Technical Specifications Worktable dimensions: 600 x 885 mm Diameter of cast iron saw wheels: 640 mm Saw wheels width: 38 mm Max. cutting height: 600 mm / 24″ Max. cutting width: 620 mm / 25″ Tilt of worktable: 0° / 20° Min./max. saw blade dimensions: 8 mm / 35 mm Standard single-phase motor S1 220V: 2.2kW (3hp) 50Hz Standard three-phase motor S1 400V 50Hz: 3kW (4hp) 50Hz Exhaust outlet diameter: 2 x 120mm 3-phase, 9hp, 25.2″ flywheels dia., 23.6″ resaw height, 24.4″ cutting width, 204″ recommended blade length, .25″ – 1.5″ blade widt

Technical Specifications Motor 3-phase 230v 6.6Hp Flywheel Diameter 29” (740mm) Table Size 28.34” x 39.37” (720x 1000mm) Table Tilt 0° -45 Cutting Height/Depth 17.7” (450mm) Cutting Width 28.34” (720mm) Min Blade Length 210.23” (5340mm) Max Blade Length 213.38” (5420mm) Overall Dimensions(Used Upright/Vertically) 46.4” x 28.3” x 104.3” (118x 72x 265cm) Net Weight 992lbs (450 kg) Total Dust Extraction Ports: 2 Total Dust Extraction Ports Diameter4.72” (120mm) 3-phase, 6.6hp, 29″ flywheel dia., 17.7″ resaw height, 28.34″ cutting width, 212″ recommended blade length, .31″ – 1.5″ blade width

Technical Specifications Motor 3-phase 230v Horsepower 9Hp Flywheel Diameter37” (940mm) Table Size32.28” x 45.66” (820x 1160mm) Table Tilt0° -45°Cutting Height/Depth22” (560mm)Cutting Width36.2” (920mm) MinBlade Length259.44” (6590mm) Max Blade Length264.17” (6710mm) Overall Dimensions(Used Upright/Vertically)61” x 36.2” x 112.59” (155x 92x 286cm) Net Weight1,584 lbs.(720kg) Total Dust Extraction Ports2 Total Dust Extraction Ports Diameter5.5” (140mm)

The Holz 10HP Dust Collector • 9 3/4″ inlet • Magnetic Starter • CFM 4,100 • 220v, 3 phase • Aluminum fan • Casters • 4 upper/lower bags • Square Design

Holz 4 hp dust collector: • 3 kw • 5 ¾” inlet • 1,750 CFM • Magnetic starter • 220v, 3 phase • Aluminum fan • Casters • 2 upper/ lower bags

Platen dimensions 3,200 x 1,600 mm (126 x 63 in.) Number of daylights 1 Total cylinder stroke 400 mm (15 3⁄4 in.) Number of pressing cylinders 8 Cylinder diameter 70 mm Total thrust 120 metric tons (264,554) Max. laminating pressure on 80% of platen area 2.94 kg/cm2 (41 psi) Hydraulic pump 2.1 kw (2.8 hp) Boiler power 18 kw Maximum platen temperature 120o C (248o F)

DC-650 1HP DUST COLLECTOR WITH 30 MICRON FILTER BAGS. JET Model 650 dust collectors hook up to 1 to 3 machines at a time for optimum dust cleaning. Each 650 series dust collector comes equipped with a quick-install collection bag, single-stage design for economical and quiet operation, 4 casters for maneuverability and total portability, and permanently lubricated, fully enclosed, fan-cooled motors for continuous duty. An optional remote control is radio frequency so there is no need for line of sight to turn the machine on and off. STYLE (TYPE) BAG • 1-HOSE CONNECTION DIAMETER (IN.) 4 • EFFICIENCY (MICRON) 30 • FILTER BAG/CANISTER LENGTH (IN.) 25 • COLLECTION BAG CAPACITY (CU. FT.) 2-1/10

The advantages of an exclusive choice. Buying a “L’invincibile six” machine means you get a customized solution, thanks to experience, technical research and Italian creativity. Console eye-S main functions: – connectivity among machines belonging to the same company network and 4.0 Industry preset – sharing of work programs and tools database – activity monitoring and reporting on the use of the machine – connectivity with SCM Thundercut (optimizer/sequencer App) – self-diagnosis, tele-service and link to troubleshooting

Technical data Max. useful spindle length 140 / 5.5 mm / inches Spindle speed 3000/4500/6000/7000/10000 rpm Max. diameter of the profiling tool 250 / 9.8 mm / inches Max. tool diameter retractable under the table at 90° 320 / 12.6 mm / inches Max. diameter of the tenoning tool 300 / 11.8 mm / inches Three-phase motor power 10 Hp

Technical data Max. useful spindle length 140 / 5.5 mm / inches Spindle speed 900 – 12000 rpm Max. diameter of the profiling tool 250 / 10 mm / inches Max. tool diameter retractable under the table at 90° 300 / 11.8 mm / inches Max. diameter of the tenoning tool 300 / 11.8 mm / inches Three-phase motor power 13 Hp

Maggi radial arm saws offer adaptability, versatility, precision and durability to shops of all sizes. Maggi has been producing radial arm saws since 1973 and over the years has continually improved technical design and quality. Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. European quality made to last! 4 HP, 2800 RPM motor 400 mm (15.75") Blade diameter capacity (Not included) 30 mm Arbor diameter 73.23" x 45.08" Table size 27.75" Max crosscut length on 3/4" thick material (90 deg) 0 to 40.5" Rip capacity 4.9" Max depth of cut 19.68" Max cut length at 45 deg on right side 12.20" Max cut length at 45 deg on left side Dust chute on blade guard as well as rear of table Machine weight: 495 Lbs. Machine dimensions: 73" x 62" x 61" T Crated dimensions: 56" x 34" x 24" T Crated weight: 523 Lbs. Voltage: 230V 3-Phase

The Maggi System 29 Boring Machine provides a 29 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking points from 0 to 90 degrees for quick set-up at any angle. Accurate positioning of the boring unit to the table with digital readout 0 to 2.5″ adjustable drilling depth with patented spiral setting device (3) patented quick release material clamps with auto-setting to firmly hold material to table Powerful 2 HP motor 47″ x 13″ cast iron table Side fences with mechanical digital readout for quick and accurate setting 120″ back fence with (2) stops – Maximum stroke 300 mm (12″) Fixed stop at 37 mm for hinges Foot actuated pneumatic clamps and drill cycle Uses 14 LH (red) and 15 RH (black) boring bits Includes: Magnetic Starter with overload protection and (29) quick change chucks Dust Outlet: 3″ Net weight: 705 lbs Dimensions: 59.3″ x 37.8″ x 50″ Tall Crated Dimensions: 59.8″ x 37.4″ x 40.5″ Tall Crated Weight: 815 lbs.

• (2) 23-Spindle heads on 32 mm centers • Distance between first and last spindle center of each head is 27-23/32″ (704 mm) • Front end adjustment for quick and easy set-up • (2) 2 HP 3,500 RPM motors • Max. boring depth is 2-1/16″ (55 mm) • Side depth counter system • Extractable 400 mm support rollers for long panels • Maximum distance between heads is 25-19/32″ (650 mm) • Minimum width is 5-1/8″ (130 mm) • Distance from fence to first head is 15 mm min. to 494 mm max. • Distance from fence to second head is 160 mm to 639 mm max. • Complete with: 46 quick change chucks, 10′ extension fence with (4) flip-stops and (2) pneumatic reference pins • (6) Patented safety clamps • This machine can be used for single or double row line drilling • Uses 24 LH (red) and 22 RH (black) boring bits • Working air pressure 94 psi • Net weight: 820 lbs • Crated weight: 940 lbs

Technical data Minimax AD 21 Max. panel width 833 / 32.75 mm / inches Worktable dimensions 905 x 372 / 35.6 x 14.6 mm / inches Worktable height 900 / 35.5 mm / inches Max. tool diameter 40 / 1.57 mm / inches Min. – max. panel height 10 – 85 / .375 – 3.25 mm / inches Spindle speed 2800 rpm # of Spindles 21 # Spindle Spacing (center-to-center) 32 mm

Technical data Longitudinal stroke mm 200 Vertical stroke mm 160 Transversal stroke mm 125 Tool spindle diameter mm 1÷16 Spindle speed rpm 3000 Three-phase motor starting from kW/Hz 1,5 (1,8) / 50 (60)

Universal combined machine with all minimax quality, at the most affordable price, ideal for demanding hobbyists and crafts woodworking workshops. A universal combination machine with all of the Minimax quality at a more affordable price, ideal for the D.I.Y. woodworkers and the small joinery workshops. The most compact 4-in-1 combination machine available, the Minimax C 26G is ideal for the hobbyist who works primarily with solid wood and is looking for a better alternative to tools like a jobsite saw, benchtop lunchbox jointer, benchtop planer, and router table. The Minimax C 26G comes standard with 2.5hp motors, 10″ sawblade capacity, 2-speed shaper, 10” Tersa jointer/planer cutterhead, and mobility kit. – 4′ Sliding table saw with 10″ main blade – 3x 2.5 Horsepower single-phase motors – 10” Jointer/Planer cutterhead with Tersa knives – Anodized aluminum sliding table with hardened steel ways – Eccentric workpiece clamp – Adjustable and removable riving knife – Outrigger/Squaring frame included (not pictured) – Tool set and operator’s manual

Machine Specs: • Cutterhead Working Width: 300mm (13") • Jointer Bed Length: 1200mm (47") • Maximum Sawblade Diameter: 250mm (10") • Sawblade Arbor Size: 16mm (5/8") • Cutting Width on Parallel Fence (Rip Capacity): 540mm (21") • Spindle Molder Speed: 4000 RPM/6500 RPM

The Minimax CU 410ES is a heavy duty, 3-phase, five function full combination machine designed to meet the needs of the most demanding environments. It features cast iron tables, tilting fence and breakthrough XYLENT technology. This technology gives an exacting finish while reducing ambient noise decibel output significantly. – 8 Horsepower motor, 3-phase 230v – Digital-mechanical readout on planer height and shaper spindle height – LED readouts & powered movements – Wheels for machine movement – XYLENT Technology Silent Cutterhead with 66 knives – XYLENT Maintenance kit with 10 additional knife inserts – Magnetic starter with overload protection – Automatic self-braking motors – Planer has four dust protected jackscrew posts for lifting of planer table – Elite cast-iron mortiser – On/Off pushbuttons for saw, planer and shaper motors on operator side – Dial indicators for shaper and saw tilt – Separate scoring motor with external scoring blade adjustments – Double trunnions on the saw and shaper supports – ¾” dado capacity – Pre-wired powerfeeder swing arm support – Rubber coated outfeed roller – Rear tilting Interchangeable shaper spindle: 1.25” standard – 3-axis, micro-adjustable shaper fence system, with memory pins and digital readout – 8.5ft aluminum sliding table with precision guideways – Cast-iron horizontal mortiser and American-style jointer guard – Short crosscut fence with mitre gauge, eccentric workpiece clamp and trimming shoe

The Minimax CU 410E is the go-to machine for woodworkers wanting a wider jointer to process larger pieces. This full combination machine has a 16” jointer/planer incorporated into it. A large sliding table to process longer sheet goods is standard, and a tilting arbor shaper is also included. This machine is heavy-duty, but is still able to be broken down to save space in a small shop. STANDARD FEATURES – Three independent 4.8 horsepower motors, single-phase 230v – Double trunnions on both saw and shaper assemblies – Interchangeable spindle shaper: 1.25” standard – Three-axis, micro-adjustable shaper fence system – Interchangeable and spare spindle – Digital-mechanical (NON-LED) readout on planer height, shaper spindle tilt and height, saw tilt. – Automatic self-braking motor – 8.5ft aluminum sliding table with precision guideways – Cast-iron horizontal mortiser – Short crosscut fence with mitre gauge, eccentric workpiece clamp and trimming shoe – 4-knife “Tersa” jointer/planer cutterhead – American-style jointer guard – Mobility kit, wheels for machine movement **The Minimax CU 410E comes with a scoring blade and does not come with a main saw blade**

Versatile and compact universal combined machine with the more advanced technological solutions for precision, reliability and safety. Entry-level machine for cabinet work. 3.4hp motors, 2-speed shaper, 3-knife Tersa cutterhead. 12″ sawblade with independently adjustable scoring and 5.5′ sliding table allows user to crosscut 4×8 panels square and efficiently. – Three independent 3.4 Horsepower motors, single-phase 230v – Independently adjusted scoring system – 5.5ft sliding table on precision ball bearings with outrigger and swing-arm – Micro-adjustable shaper fence – Miter fence and eccentric hold-down clamp – Three-knife “Tersa” quick-change cutterhead – Jointer tables open towards the machine, and away from operator – Mobility kit, wheels for machine movement

Technical data profiset 40 Min./max. working width (finished section) 23/180 mm Min./max. working height (finished section) 6/105 mm Feed speed 6 – 12 m/min Spindles speed 6000 rpm

Technical data profiset 60 Min./max. working width (finished section) 25 (15 opt.)/230 mm Min./max. working height (finished section) 6/120 mm Feed speed – m/min Feed speed (variable with inverter) 25-May m/min Spindles speed 6000 rpm Axial adjustment of spindles with respect to the worktable 40 mm

Our longest selling bandsaw, the S 45N set the bar high for quality bandsaws. This machine has 18” cast iron flywheels, and a large cast-iron table. With 12” resaw height it is also versatile to do either pattern work, or resawing operations! This machine has been a reliable tool in the Minimax lineup for over 30 years.

Technical data Axes Max. panel dimensions X-Y-Z 3000 x 900 x 50 mm Min. panel dimensions X-Y-Z 300 x 90 x 10 mm Max speed X-Y axes 20 Drilling head Spindles (X axis) 2 (1+1) n. Spindles (Y axis) 2 (1+1) n. Spindles (Z axis) 7 (4X-4Y di cui uno in comune) n. Lama integrata fissa, con taglio in direzione Blade diameter 125 mm Blade thickness 6 mm Motor power 2,2 kW Spindles rotating speed 4460 giri/min Blade rotation speed 5700 giri/min

Technical data T 124 Distance between centers, with copying device mm / inches 1150 / 42.25, 1120 / 44 Centers height (Swing) mm / inches 200 (400) / 7.8 (15.75) 4 chuck speeds rpm 570/1000/1850/2500 Single-phase motor Hp 2.5

Fixed Spindle Shaper The Minimax TW 45C is a 4 horsepower spindle moulder, with sliding table and a fixed spindle. It is versatile and easy to use, ideal for woodworkers and craftsmen. Featuring a standard 1.25” spindle with dual exhaust ports, T-slot on front of the table, and miter gauge for angled cuts, flip-stops and eccentric clamp. STANDARD EQUIPMENT  -Forward/ reverse-run switch  -T-Slot on front of table  -Micro-adjustable infeed and outfeed fences  -1.25” spindle standard  -Quick spindle lock for tool changes  -Dual exhaust outlets  -Tool set and manual included  -Miter gauge  -Two flip-stops  -Eccentric clamp

Techical Data Working areas X-Y axes dimensions mm 3115 x 1320 Y-axis panel clearance mm 1600 Axes Vectorial speed “Pro-Space” m/min 56 Z-axis panel clearance mm 180 Drilling unit Independent vertical spindles (up to) no. 21 Independent horizonal spindles (up to) no. 10 Rotation speed (max.) rpm 8000 Integrated blade in X, diameter mm 125 Routing unit Motor power (max.) kW (hp) 14 (19) Rotation speed (max.) rpm 24000 Available tools on tool changers (up to) places 25

Technical Data 4’x’8 Flat Table CNC SAFETY Safety Pro-SPACE AXES MOVEMENT X Axis Positioning Speed 25 Meters/Min (984 Inches/Min) Y Axis Positioning Speed 25 Meters/Min (984 Inches/Min) Automatic Lubrication Yes Drive System X/Y = Helical Rack & Pinion, Z = Ball Screw Dual X-Axis Servos No WORKTABLE X & Y 2468 x 1255 mm (8′ x 4′) Panel Passage 150mm (5.9″) **(100 mm Drilling) Z Axis Stroke 250 mm (9.84″) Number of Vacuum Zones 2 Zones Available Work Areas A-D, E-H Type of Work Table Alumnim Grid Table Reference Pins Std Pins (A,D,E,H) Vacuum Pumps One (1) Becker 300cm/h Pump Vacuum Cups / Clamps None ROUTER HEAD Router Axes 3 Router Spindle HP 13 HP Router Router Spindle Speeds 1,500-24,000 rpm Router Cooling System Air Cooled Aggregate-Ready No Air Blowers for Spindle Yes Measuring Device for Panel Thickness No Measuring Device for Tool Length Yes Dust Hood Manual Setting (4 Positions) Automatic Tool Changer TR11 + Long Tools Mgmt DRILL UNIT/PIGGYBACK Type of Drill Unit F12 Vertical Drills 12 Horizontal Drills 0 Drill Unit Saw Blade No Drill Unit RPM 2,000-8,000 Drill Unit Dedicated Inverter Inverter Shared with Router Dedicated Z2 Axis No Piggyback Unit None AUTOMATION Oflload Rake (Std, NC) Yes Loading Cups No Loading Table No Offload Conveyor No Side Fences No Flow Direction N/A MISCELLANEOUS Transformer 208V, 230V, 460V CFM Required *Estimated 3535CFM Max Power Required *Estimated Compressed Air Requirement *Estimated Additional Options: Cabinet AC Addtl Maestro USB Key Ventilation on Base SOFTWARE/CONTROL PC Console Eye-M PRO OS Windows 10 – 64 bit Pendant Tecpad Active Active Maestro (Basic (3+2), Nest, 3D) Basic (3+2)+ Rect Nesting Connect Connect: 1yr Subscription

Tech Specs: 5’x 12′ Flat Table CNC Axes Vectorial speed X-Y axes 35 m/min Z axis stroke 250 mm Z axis panel passage 150 mm Routing unit Motor power (max.) 15 (21) kW (hp) Rotation speed (max.) 24000 rpm Available tools on tool changer (max.) 15 places Drilling unit Independent vertical spindles (max.) 12 n. Independent horizontal spindles (max.) 6 n. Rotation speed (max.) 8000 rpm

Main Features 4’x8′ CNC Router Reinforced base and innovative one-piece frame High Precision, High Load Prismatic Bearing Guides A.C. Servo Motors X, Y & Z Axes Solid State Inverter Controls Router RPM High Performance Aluminium Multifunction Worktable Hiteco Electrospindle 9.5kW (13HP) Pre-arrangement for “Hiteco” Aggregates F7 Drill Head Drilling Unit Managed by Inverter TR 8 Position Tool Changer Tool Touch Probe Manual Lubrication Pump One (1) 300 Cubic Meter/Hour Vacuum Pump Wired Remote Control Console with Integrated PC “Eye-M “

Technical data Nova tf 110 Max. useful spindle length 140 / 5.5 mm / inches Spindle speed (at 50 Hz) 3000/4500/6000/7000/10000 rpm Max. diameter of the profiling tool 250 / 9.8 mm / inches Max. tool diameter retractable under the table at 90° 320 / 12.6 mm / inches Max. diameter of the tenoning tool with spindle diam. 30-35 (40-50) 300 / 11.8 mm / inches Three-phase motor 8 Hp

Technical data Panel length 20 mm (3/4”) 1300 mm (51”) / 2600 mm (102”) Panel width 40 mm (1.57”) ∞ Panel thickness 10 mm (3/8”) 67 mm (2 5/8”) Installed power 13 kW Compressed air 6 BAR Dust extraction hood 125mm (5”) qty 2 Dust extraction 600 cfm Width “X” CNC 1300 mm (51”) Depth “Y” CNC 55 mm (2.17”) Vertical “Z” CNC 80 mm (3.15”) Voltage 460V (220V)/60Hz/3~ Net weight 1600 Kg (3500 lbs) / 2200 Kg (4850 lbs)

Technical data Panel length 20 mm (3/4”) – 1300 mm Panel width 40 mm (1.57”) – ∞ Panel thickness 10 mm (3/8”) – 25.4 mm (1”) Installed power 10 Kw Compressed air 6 BAR Dust extraction hood 60 mm (2 3/8”) Dust extraction 250 cfm Width “X” CNC 1300 mm (51”) Depth “Y” manual 40 mm (1.57”) Vertical “Z” manual 40 mm (1.57”) Voltage 220V/60Hz/3~ Net weight ~1000 kg (2200 lbs)