All Products

The Minimax FS 41ES is a professional grade, heavy-duty, long bed jointer/planer combination machine designed to meet the needs of the most demanding environments. It features cast iron tables, tilting fence, four-post planner pillar, and quick changeover. This technology gives an exacting finish while reducing ambient noise decibel output significantly. – 10 Horsepower motor – Additional overturning fence for processing of thin workpieces – Cast Iron mortiser with 120mm exhaust hood complete with 16mm chuck Strokes (X-160mm), (Y-120mm) and (Z-105mm) – Dedicated Surface Planer fence (1200mm x 150mm) – Digital-mechanical readout on planer height (1/10mm) – Parallelogram jointer tables – 4 dust-protected planer table columns with trapezoidal threading – Helicoidal thicknesser infeed roller – Sandblasted steel thicknesser outfeed roller – Pre-setting for mortiser – LED readouts & powered movements – American-style jointer guard – Wheels for machine movement – XYLENT Technology Helicoidal Cutterhead with 66 knives – XYLENT Maintenance kit with 10 additional knife inserts (15mm x 15mm x 2.5mm) ** The Minimax FS 41ES comes with an American-style spring-loaded jointer guard and does not come with the pictured European guard in the attached pictures *

GRAFLOSCONCA ULTRA Spray400 ml Article-No: 081215 Adhesive lubricant containing graphite GRAFLOSCON CA ULTRA SPRAY is a solvent-containing mineral oil base adhesive lubricant with a high content of solid particles (fine graphite) applied by spray can. It contains an Al complex soap, can carry extreme loads and has good anticorrosion properties. It does not contain bitumen, heavy metals or chlorine. The propellant is free from CFC.

With gluing of the panel edge, also with edging solid wood strips up to 5 mm thickness, offers the “very best” performance in edge banders at this level. The features, coupled to its ease-of-use, makes it the perfect edge bander for small woodworking, furniture and panel processing companies. Technical Data • Work table dimensions mm 3000 x 525 • Min. ÷ max. thickness of rolled edges mm 0,4 ÷ 3 • Max. thickness of edges in strips mm 5 • Min. ÷ max. panel height mm 8 ÷ 50 • Min. panel length/width mm 190/110 • Min. panel length/width with end cutting/rounding unit mm 120/110 • Feed speed

A versatile dust collection system that fits 2.5” and 4” dust collection systems 2.5” and 4” ports fit most dust collection systems Easy-to-use clamps make redirecting the internal tube a breeze Quick and easy to install

Designed to fit your SawStop 27″ deep cast iron router tables. Compatible with various routing accessories like feather boards, flip stops and more Dust port: 2.25″ diameter This fence assembly features two adjustable faces with shims and adjustable scales

This 27″ cast iron table is built to fit either the SawStop Benchtop Stand or be installed in-line between SawStop TGP2 series table saw rails. Maximize your shop space with the in-line installation Delivers a precision experience complemented by SawStop’s line of RT products Precision ground to .0118” Router plate opening: 11 3/4″ x 9 1/4″

This 30″ cast iron table is built to be installed in-line between SawStop TGI2 series table saw rails. Maximize your shop space with the in-line installation Delivers a precision experience complemented by SawStop’s line of RT products Precision ground to .0118” Router plate opening: 11 3/4″ x 9 1/4″

Designed to fit your SawStop 30″ and 32″ wide router tables. Compatible with various routing accessories like feather boards, flip stops and more Dust port: 2.25″ diameter This fence assembly features two adjustable faces with shims, external rails and adjustable scales

This massive 32″ x 24″ cast iron table is built to fit the SawStop RT-STF Floor Stand. Delivers a highly-precise experience for industrial-grade results Precision ground to .0118” Router plate opening: 11 3/4″ x 9 1/4″

These phenolic inserts are graduated in size for quick-change versatility. Ultra-strong phenolic core material to reduce tear out and chip out Pre-formed sizes include: 0.25″, 0.5″, 1.5″ and 2.5″ Four-point, cam-style lock to ensure a secure lockdown Machined to precisely fit the SawStop RT-LFT Router Lift

These solid phenolic inserts can be cut to deliver exact results for each of your favorite bits. Ultra-strong phenolic core material to reduce tear out and chip out Four-point, cam-style lock to ensure a secure lockdown Machined to precisely fit the SawStop RT-LFT Router Lift

High quality heat treated steel Expansion slots help reduce vibration, noise and heat buildup Precision balanced ATB, 5/8” arbor, 3mm kerf, Rake angle 15°, Top angle 10°, Plate thickness 2mm, Tooth Thickness 0.079”

True-To Size Cuts: 24-Tooth main blades and flat-grind chippers provide cleaner cuts Extended Cutting Range: A variety of chipper widths provides maximum flexibility Cleaner Cuts: -5° hook means less tear out for cleaner cuts 8″, 5/8” arbor, 24-tooth main blades, 5 chippers, 6 shims, 1/4″ to 29/32″ cutting range, -5° hook angle, 6000 maximum RPM

Compatible with most routers, this set supports general routing, dovetailing, and more. Includes a custom-fit phenolic insert, eight guides (1 19/64″, 5/8″, 27/32″, 17/32″, 17/64″, 9/32″, 11/32″, 13/32″) and 1 lock nut. Includes 8 template guides for various routing applications: 1 19/64”, 5/8”, 27/32”, 17/32”, 17/64”, 9/32”, 11/32”, 13/32” Includes 1 locking nut Includes 1 3/8” Insert Ring Designed to fit most routers

The electro mechanical cabinet clamp action e is the solution for the assembly of cabinets. Intuitive and easy to use. This semiautomatic machine is suitable for all cabinet manufacturers, with low productive volumes (up to 30 cabinets/shift).

The electro mechanical cabinet clamp action p is the solution for the assembly of cabinets. The automatic set-up allows to a simple use of the clamp. This automatic machine is suitable for all cabinet manufacturers, with medium productive volumes (up to 50 cabinets/shift).

• Amana Tool EZ Dial Scoring Set • Shim Free & Adjustable • Carbide Tipped • Fully Adjustable in increment of .1mm • Kerf Adjusts from 2.8mm-3.6mm • Fits on all SCM Sliding Table Saws

Main configurations: 160 tons of three-layer hot press technical parameters: Hot plate size: 2500✘1300mm height 100mm*42mm Nominal pressure: 160 tons Number of hot plates: 3 sheets Spacing between layers: 100mm Hydraulic station power: 7kw Heating power: 36kw Hydraulic oil model: Heat transfer oil temperature: 180-200°C Equipment weight: about 8 tons Size: width 1700✘ length 3800✘2200 (height) mm

Brand Ambition 1100 Edgebander Stations Include: Pre-Mill Gluing End Trim Top & Bottom Scrape & Buff In good running condition and still in use under power

Cast Iron Table Insert For 36″ PCS RT (Filler Table To Complete A PCS 36″ Set Up)

TWO CAST IRON WINGS

The Class TF 130PS is the workhorse of the SCM shaper line. It has a very robust structure and all the controls can be accessed on the front of the machine for easy use. An integrated sliding table further increases the flexibility of this machine. A mechanical digital reader ensures the precision of the spindle adjustment. 3ph/ 220V 11HP fixed 1 1/4 MK5 interchangeable spindle 5-speed Aluminum fence w/ mechanical adjustment Sliding table Tenoning kit

A must for the serious woodworker, the Class TF 130 is the SCM shaper that combines quality and value for your investment. It has a very robust structure and all the controls can be accessed on the front of the machine for easy use. A mechanical digital readout ensures the precision of the spindle adjustment. 3ph /220V 11 HP Fixed 1 1/4 " MK 5 interchangeable spindle 5-speed aluminum fence w/ mechanical adjustments

The Class TI 120 is one of SCM Groups finest manual tilting spindle shapers. The tilting spindle allows craftsmen to use more creativity in designing high-end, custom products. The quality and flexibility of this machine are especially appealing to architectural millwork operations.

CNS Cast Iron Extension Wing

10 HP, 5000 CFM The SHK Series enclosureless dust collector is designed for the collection of sawdust and is ideal for indoor use in smaller wood shops, or for more localized extraction dedicated to specific woodworking machinery. The optional mechanical shaker cleaning system increases production time by reducing labor required to maintain filter efficiency. The bags can be mechanically shaken after the fan is switched off (per NFPA guidelines). The filter housing supports anti-static polyester filter sleeves fixed by double snap rings into a tube sheet, which is mounted atop the material collection hopper that empties the collected material into plastic bags. The collector frame is made of durable 14 GA galvanized sheet steel. The material handling fan is rated for S1 duty cycle (continuous running), and features a high-efficiency IP55 motor. The SHK Series collector is available with several waste discharge options: Hopper and waste bags (standard, as shown). Haul-away forklift dump bin. Waste barrels with viewing windows. Collection hopper with rotary screw extractor and rotary air lock (leg extensions available for additional clearance below discharge). Closed-loop material transfer system including rotary screw extractor, rotary air lock, material transfer fan and material transfer ductwork. Enclosure panels are available for locating SHK Series units outdoors. All SHK Series units are capable of retrofit for locating outdoors. Additional safety equipment is available for spark detection & extinguishing, deflagration relief & containment, and abort for return air applications.

7.5 HP, 3600 CFM The SHK Series enclosureless dust collector is designed for the collection of sawdust and is ideal for indoor use in smaller wood shops, or for more localized extraction dedicated to specific woodworking machinery. The optional mechanical shaker cleaning system increases production time by reducing labor required to maintain filter efficiency. The bags can be mechanically shaken after the fan is switched off (per NFPA guidelines). The filter housing supports anti-static polyester filter sleeves fixed by double snap rings into a tube sheet, which is mounted atop the material collection hopper that empties the collected material into plastic bags. The collector frame is made of durable 14 GA galvanized sheet steel. The material handling fan is rated for S1 duty cycle (continuous running), and features a high-efficiency IP55 motor. The SHK Series collector is available with several waste discharge options: Hopper and waste bags (standard, as shown). Haul-away forklift dump bin. Waste barrels with viewing windows. Collection hopper with rotary screw extractor and rotary air lock (leg extensions available for additional clearance below discharge). Closed-loop material transfer system including rotary screw extractor, rotary air lock, material transfer fan and material transfer ductwork. Enclosure panels are available for locating SHK Series units outdoors. All SHK Series units are capable of retrofit for locating outdoors. Additional safety equipment is available for spark detection & extinguishing, deflagration relief & containment, and abort for return air applications.

About this machine: 37″ Wide machine Combination head with 4.75″ diameter, 85 shore rubber contact drum and 2″ wide platen 18 HP main motor for sanding unit 0.7 HP, 2-speed feed motor (15 and 30 FPM) 6.25″ Maximum workpiece thickness Uses 37″ x 60″ abrasive belts Accurate and reliable electronic tracking of abrasive belt Pneumatic belt tensioning with center fulcrum to compensate for tapering of abrasive belt Powered table positioning with electronic digital readout Automatic thickness setting device Rubber coated pressure rolls before and after sanding unit Infeed and outfeed tables with (2) rollers each 50 Shore negative profile (waffle pattern) rubber feed mat Automatic emergency stop of machine for: Sanding belt breaking, tensioning, overtracking; Absence of compressed air; overload on main motor (2) Platens provided – (1) Rigid, (1) Soft Air requirements: 6 Bar (88 PSI) Dust requirements: 900 CFM Electrical requirements: 54 Amps @ 230 V, 3 Phase

About The Machine: • 37″ Wide machine • Combination head with 4.75″ diameter, 85 shore rubber contact drum and 2″ wide platen • 18 HP main motor for sanding unit • 0.7 HP, 2-speed feed motor (15 and 30 FPM) • 6.25″ Maximum workpiece thickness • Uses 37″ x 60″ abrasive belts • Accurate and reliable electronic tracking of abrasive belt • Pneumatic belt tensioning with center fulcrum to compensate for tapering of abrasive belt • Powered table positioning with electronic digital readout • Automatic thickness setting device • Rubber coated pressure rolls before and after sanding unit • Infeed and outfeed tables with (2) rollers each • 50 Shore negative profile (waffle pattern) rubber feed mat • Automatic emergency stop of machine for: Sanding belt breaking, tensioning, overtracking; Absence of compressed air; overload on main motor • (2) Platens provided – (1) Rigid, (1) Soft • Air requirements: 6 Bar (88 PSI) • Dust requirements: 900 CFM • Electrical requirements: 54 Amps @ 230 V, 3 Phase

DOWNDRAFT DUST COLLECTION BOX FOR ROUTER TABLES

FOLDING OUTFEED TABLE

Machine Specs: • Worktable Dimension: 600mm x 885mm • Cast Iron Saw Wheels Diameter: 640mm • Saw Wheel Width: 38mm • Maximum Cutting Height: 600mm (24″) • Maximum Cutting Width: 620mm • Worktable Tilting (CE): 0° – 45° (20°) • Exhaust Outlet Diameter: N° 2mm x 120mm • Voltage: 220V 1-phase, 4.8hp, 25.2″ flywheels dia. , 23.6″ resaw height, 24.4″ cutting width, 204″ recommended blade length, .25″ – 1.5″ blade

Technical Specifications Worktable dimensions: 600 x 885 mm Diameter of cast iron saw wheels: 640 mm Saw wheels width: 38 mm Max. cutting height: 600 mm / 24″ Max. cutting width: 620 mm / 25″ Tilt of worktable: 0° / 20° Min./max. saw blade dimensions: 8 mm / 35 mm Standard single-phase motor S1 220V: 2.2kW (3hp) 50Hz Standard three-phase motor S1 400V 50Hz: 3kW (4hp) 50Hz Exhaust outlet diameter: 2 x 120mm 3-phase, 9hp, 25.2″ flywheels dia., 23.6″ resaw height, 24.4″ cutting width, 204″ recommended blade length, .25″ – 1.5″ blade widt

Technical Specifications Motor 3-phase 230v 6.6Hp Flywheel Diameter 29” (740mm) Table Size 28.34” x 39.37” (720x 1000mm) Table Tilt 0° -45 Cutting Height/Depth 17.7” (450mm) Cutting Width 28.34” (720mm) Min Blade Length 210.23” (5340mm) Max Blade Length 213.38” (5420mm) Overall Dimensions(Used Upright/Vertically) 46.4” x 28.3” x 104.3” (118x 72x 265cm) Net Weight 992lbs (450 kg) Total Dust Extraction Ports: 2 Total Dust Extraction Ports Diameter4.72” (120mm) 3-phase, 6.6hp, 29″ flywheel dia., 17.7″ resaw height, 28.34″ cutting width, 212″ recommended blade length, .31″ – 1.5″ blade width

Technical Specifications Motor 3-phase 230v Horsepower 9Hp Flywheel Diameter37” (940mm) Table Size32.28” x 45.66” (820x 1160mm) Table Tilt0° -45°Cutting Height/Depth22” (560mm)Cutting Width36.2” (920mm) MinBlade Length259.44” (6590mm) Max Blade Length264.17” (6710mm) Overall Dimensions(Used Upright/Vertically)61” x 36.2” x 112.59” (155x 92x 286cm) Net Weight1,584 lbs.(720kg) Total Dust Extraction Ports2 Total Dust Extraction Ports Diameter5.5” (140mm)

HSK-F 63 Tool Holders manufactured of high quality steel that is polished for corrosion resistance. The tool holder (collet chuck) comes with a ball-bearing collet nut that provides more even clamping force as well as the ability to be used for either clockwise or counterclockwise rotating tools. Made in Germany and balanced to G2.5 – Ball Bearing Collet Nut Included. In stock in 3 popular styles, for ER32, ER40 and RDO35 / SYOZ 25 style collets. Common Standards for a wide range of CNC Machining Centers such as Busellato, Homag, IMA, SCM, Felder (Format4), Weeke, Haas and others.

Make tool setup a snap! Tool setup fixtures clamp HSK of ISO tool holders for accurate tool set-up and makes awkward tool handling a thing of the past. When firmly secured to a work bench, the set up fixture accepts the tool holder and offers a safe and effective way to check and tighten the tool into the tool holder using a torque wrench. This insures secure tool assembly without over-tightening the collet nut. A ball bearing in the setup fixture locks the toolholder in position so the collet nut can be tightened without movement. Proper setup eliminates test cuts as well as wasted time and material.

The Holz 10HP Dust Collector • 9 3/4″ inlet • Magnetic Starter • CFM 4,100 • 220v, 3 phase • Aluminum fan • Casters • 4 upper/lower bags • Square Design

Holz 4 hp dust collector: • 3 kw • 5 ¾” inlet • 1,750 CFM • Magnetic starter • 220v, 3 phase • Aluminum fan • Casters • 2 upper/ lower bags

10′ Sliding table saw Heavy Duty Construction 126″ max length of cross cut 50″ rip capacity 7.5 hp main motor 1hp scoring motor 14″ blade capacity 30mm arbor Motorized Height adjustment of the main blade Manual Tilting arbor from 0 to 45 degrees Overarm dust collection included Heavy Industrial Aluminum cross cut fence with two flip stops 220v, 3 phase 60hz

Holz Heavy Duty 24″ Planer Max Width 630mm Max Thickness 300mm Feed Speed 8, 10, 12 m/min Spindle Speed 4800 rpm Blades 4 straight knife Motor 10hp, 220v 3 phase Weight 1380 lbs

Holz Paoloni Fixed Spindle Shaper Main spindle speed r/min 1300/2500/3500/5000/6000/8500 Spindle diameter 1 1/4″ Max height 5.9″ Table size 1200×700 mm Main Motor 5.5hp Overall dimensions 1200×800×1240 mm Net weight 838 lbs