Drilling & Insertion

Compact edge bander with a sturdy framework that guarantees reliability and repeatability. Thanks to its technological solutions, olimpic 300 is ideal for craftsmen who want to start edging professionally, with ease of use and maximum finishing quality.

Brand Ambition 1100 Edgebander Stations Include: Pre-Mill Gluing End Trim Top & Bottom Scrape & Buff In good running condition and still in use under power

The Maggi System 29 Boring Machine provides a 29 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking points from 0 to 90 degrees for quick set-up at any angle. Accurate positioning of the boring unit to the table with digital readout 0 to 2.5″ adjustable drilling depth with patented spiral setting device (3) patented quick release material clamps with auto-setting to firmly hold material to table Powerful 2 HP motor 47″ x 13″ cast iron table Side fences with mechanical digital readout for quick and accurate setting 120″ back fence with (2) stops – Maximum stroke 300 mm (12″) Fixed stop at 37 mm for hinges Foot actuated pneumatic clamps and drill cycle Uses 14 LH (red) and 15 RH (black) boring bits Includes: Magnetic Starter with overload protection and (29) quick change chucks Dust Outlet: 3″ Net weight: 705 lbs Dimensions: 59.3″ x 37.8″ x 50″ Tall Crated Dimensions: 59.8″ x 37.4″ x 40.5″ Tall Crated Weight: 815 lbs.

• (2) 23-Spindle heads on 32 mm centers • Distance between first and last spindle center of each head is 27-23/32″ (704 mm) • Front end adjustment for quick and easy set-up • (2) 2 HP 3,500 RPM motors • Max. boring depth is 2-1/16″ (55 mm) • Side depth counter system • Extractable 400 mm support rollers for long panels • Maximum distance between heads is 25-19/32″ (650 mm) • Minimum width is 5-1/8″ (130 mm) • Distance from fence to first head is 15 mm min. to 494 mm max. • Distance from fence to second head is 160 mm to 639 mm max. • Complete with: 46 quick change chucks, 10′ extension fence with (4) flip-stops and (2) pneumatic reference pins • (6) Patented safety clamps • This machine can be used for single or double row line drilling • Uses 24 LH (red) and 22 RH (black) boring bits • Working air pressure 94 psi • Net weight: 820 lbs • Crated weight: 940 lbs

Further enhanced compared to its predecessor with the new end cutting-rounding unit. This new unit allows further processing, saving a substantial amount of time with an ease of processing. This technological solution is unique in its category, where such operations are normally a feature of more expensive and higher level machinery. Technical Data 1ph 10" EYE-S touch screen control Units: Dual pre-mil combined End trim and Corner rounding Top/bottom trim • Work table dimensions mm 3000 x 525 • Min. ÷ max. thickness of rolled edges mm 0,4 ÷ 3 • Max. thickness of edges in strips mm 5 • Min. ÷ max. panel height mm 8 ÷ 50 • Min. panel length/width mm 190/110 • Min. panel length/width with end cutting/rounding unit mm 120/110

Technical data Minimax AD 21 Max. panel width 833 / 32.75 mm / inches Worktable dimensions 905 x 372 / 35.6 x 14.6 mm / inches Worktable height 900 / 35.5 mm / inches Max. tool diameter 40 / 1.57 mm / inches Min. – max. panel height 10 – 85 / .375 – 3.25 mm / inches Spindle speed 2800 rpm # of Spindles 21 # Spindle Spacing (center-to-center) 32 mm

Technical data Longitudinal stroke mm 200 Vertical stroke mm 160 Transversal stroke mm 125 Tool spindle diameter mm 1÷16 Spindle speed rpm 3000 Three-phase motor starting from kW/Hz 1,5 (1,8) / 50 (60)

Technical data Min. ÷ max. edge thickness 0,4 ÷ 3 mm Min. ÷ max. edge height 10 ÷ 84 mm Min. ÷ max. panel height 8 ÷ 80 mm Min. panels length/width 290/50 mm Min. internal radius (concave), 0,4 mm thickness 25 mm Min. external radius (convex), 0,4 mm thickness 5 mm Feed speeds 3 - 4 - 5 - 6 - 7 - 8 m/min

Minimax ME 25 Single Sided Edgebander - Control panel on machine infeed side - Machine frame made of high rigidity ribbed steel to guarantee an excellent support for the operating units - Top thick steel pressure beam with rubber coated wheels - Exclusive feed belt system - Manual adjustment of top beam with automatic positioning of the operating units to the selected panel thickness - Numeric indicator of the selected panel thickness - Wood strip loading device - Glue smoke-specific exhaust outlet; centralized extraction of the other dusts - Panel support roller which can be extended on the entire length of the machine - Safety enclosure - Electrical cabinet with PLC, padlockable main switch and overload protection - Emergency push buttons - Scraping unit (cutter radius 3mm) - Buffing unit (two independent motors – 2,800 rpm) - Adjustable infeed fence with numeric readout - Automatic lowering of the glue pot temperature after temporary non-usage

With gluing of the panel edge, also with edging solid wood strips up to 5 mm thickness, offers the “very best” performance in edge banders at this level. The features, coupled to its ease-of-use, makes it the perfect edge bander for small woodworking, furniture and panel processing companies. Technical Data • Work table dimensions mm 3000 x 525 • Min. ÷ max. thickness of rolled edges mm 0,4 ÷ 3 • Max. thickness of edges in strips mm 5 • Min. ÷ max. panel height mm 8 ÷ 50 • Min. panel length/width mm 190/110 • Min. panel length/width with end cutting/rounding unit mm 120/110 • Feed speed

High productivity edge bander with high quality performance. me 40, further enhanced compared to the previous version, with the new rounding unit that allows to obtain high quality finished products, without further processing, allowing a considerable saving of time and increasing ease of processing. Technical Data • Work table dimensions mm 3465 x 710 • Min. ÷ max. thickness of rolled edges mm 0,4 ÷ 3 • Max. thickness of edges in strips mm 5 • Min. ÷ max. panel height mm 8 ÷ 50 • Min. panel length/width mm 190/110 Feed speed m/min 9

Technical data Axes Max. panel dimensions X-Y-Z 3000 x 900 x 50 mm Min. panel dimensions X-Y-Z 300 x 90 x 10 mm Max speed X-Y axes 20 Drilling head Spindles (X axis) 2 (1+1) n. Spindles (Y axis) 2 (1+1) n. Spindles (Z axis) 7 (4X-4Y di cui uno in comune) n. Lama integrata fissa, con taglio in direzione Blade diameter 125 mm Blade thickness 6 mm Motor power 2,2 kW Spindles rotating speed 4460 giri/min Blade rotation speed 5700 giri/min

Technical data Max. edgebanding thickness 4 mm Min. - max. panel height 14 - 80 mm Min. panel length/width 200/160 mm Minimum internal radius 25 mm Variable cutters speed 9000 - 15000 rpm

Technical data Panel length 20 mm (3/4”) 1300 mm (51”) / 2600 mm (102”) Panel width 40 mm (1.57”) ∞ Panel thickness 10 mm (3/8”) 67 mm (2 5/8”) Installed power 13 kW Compressed air 6 BAR Dust extraction hood 125mm (5”) qty 2 Dust extraction 600 cfm Width “X” CNC 1300 mm (51”) Depth “Y” CNC 55 mm (2.17”) Vertical “Z” CNC 80 mm (3.15”) Voltage 460V (220V)/60Hz/3~ Net weight 1600 Kg (3500 lbs) / 2200 Kg (4850 lbs)

Technical data Panel length 20 mm (3/4”) – 1300 mm Panel width 40 mm (1.57”) – ∞ Panel thickness 10 mm (3/8”) – 25.4 mm (1”) Installed power 10 Kw Compressed air 6 BAR Dust extraction hood 60 mm (2 3/8”) Dust extraction 250 cfm Width “X” CNC 1300 mm (51”) Depth “Y” manual 40 mm (1.57”) Vertical “Z” manual 40 mm (1.57”) Voltage 220V/60Hz/3~ Net weight ~1000 kg (2200 lbs)

Servo Driven Edgebander, Automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material (veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 8mm. Machine Base The machine base is made of a tubular steel structure and is designed to assure maximum stability and accuracy. Electronic Top Pressure Beam All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has two rows of staggered pressure rollers with steel bearings. Capacities and Speed • Edgebanding thickness: .4mm – 6mm (.016-1/4”) • Guillotine capacity: 3mm • Feed speed: 36 ft/min. • Panel height: 3/8” min – 2 1/8” max • Minimum panel length: 5 1/2” • Minimum panel width: 2 3/8” • Minimum distance between panels: 22”

Technical data Minimax Startech 27 Number of spindles 27 n. Centre distance between spindles 32 mm Spindles rotating speed 3000 rpm Spindles motor power 2 Hp

Technical data Width “X” 1300 mm (51”) Depth “Y” 40 mm (1.57”) Vertical “Z” 40 mm (1.57”) Voltage 460V (220V)/60hz/3~ Net weight ~1200 kg (~2650 lbs)

The Maggi System 23 Boring Machine provides a 23 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking points from 0 to 90 degrees for quick set-up at any angle. Accurate positioning of the boring unit to the table with digital readout 0 to 2.5″ adjustable drilling depth with patented spiral setting device (2) patented quick release material clamps with auto-setting to firmly hold material to table Powerful 2 HP motor 37″ x 13″ cast iron table Side fences with mechanical digital readout for quick and accurate setting 120″ back fence with (2) stops – Maximum stroke 300 mm (12″) Fixed stop at 37 mm for hinges Foot actuated pneumatic clamps and drill cycle Uses 11 LH (red) and 12 RH (black) boring bits Includes: Magnetic Starter with overload protection and (23) quick change chucks Dust Outlet: 3″ Net weight: 630 lbs Dimensions: 51.7″ x 37.8″ x 50″ Tall Crated Dimensions: 42.2″ x 37.4″ x 40.5″ Tall Crated Weight: 705 lbs.

The Maggi System 21 Prestige Boring Machine provides a 21 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking points from 0 to 90 degrees for quick set-up at any angle. Accurate positioning of the boring unit to the table with digital readout 0 to 2.5″ adjustable drilling depth with patented spiral setting device (2) Patented quick release material clamps with auto-setting to firmly hold material to table Powerful 2 HP motor 34″ x 13″ cast iron table Cast iron side fences with ruler and magnifying glass Mirror imaging device to ensure quick and accurate set-up of the side fences 120″ back fence with (2) stops – Maximum stroke 300 mm (12″) Fixed stop at 37 mm for hinges Foot actuated pneumatic clamps and drill cycle Uses 10 LH (red) and 11 RH (black) boring bits Includes: Magnetic starter with overload protection and (21) quick change chucks Dust Outlet: 3″ Net weight: 605 lbs Dimensions: 40.5″ x 40.5″ x 50″ Tall Crated Dimensions: 42.2″ x 37.4″ x 40.5″ Tall Crated Weight: 685 lbs

About This Machine: The K360 is an automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material (veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 6mm. Machine Base The machine base is made of a tubular steel structure and is designed to assure maximum stability and accuracy. Top Pressure Beam All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has two rows of staggered pressure rollers with steel bearings. Capacities And Speed – Edgebanding thickness: .4mm – 6mm (.016-1/4”) – Guillotine capacity: 3mm – Feed speed: 36 ft/min. – Panel height: 3/8” min – 2 1/2” max – Minimum panel length: 5 1/2” – Minimum panel width: 2 3/8” – Minimum distance between panels: 20” Glue Station Teflon coated glue pot to facilitate glue changeover. Warm up time is approximately eight to ten minutes. The unit is also equipped with a quick disconnect plug for changing from one pot to another.

High performance and versatility: olimpic k 560 is designed for companies requiring to process many panels per day even though they may be different from one to another. olimpic k 560 has several solutions that guarantee always the best machining on any panel type. Capacities and Speed – Edgebanding thickness: .4mm – 6mm (.016-1/4”) – Guillotine capacity: 3mm – Feed speed: 40/60 ft/min. – Panel height: 3/8” min – 2 1/8” max – Minimum panel length: 5 1/2” – Minimum panel width: 2 3/8” – Minimum distance between panels: 20”

The machine base is made of a tubular steel structure and is designed to assure maximum stability and accuracy. Pressure Beam: All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has digital height indicators and a double row of pressure rollers with steel bearings Capacities And Speed: – Edgebanding thickness: .4mm – 3mm (.016-1/8”) – Guillotine capacity: 3.0mm – Feed speed: 30 ft/min. – Panel height: 3/8” min – 1 15/16” max – Minimum panel length: 5 1/2” – Minimum panel width: 2 3/8” – Minimum distance between panels: 22” Glue Station Teflon coated glue pot to facilitate glue changeover. Warm up time is approximately eight to ten minutes. The unit is also equipped with a quick disconnect plug for changing from one pot to another.

Edge thickness mm 0,4 - 6/8 (12 opt.) Panel thickness mm 8 - 60 Feed speed m/min 12 - 18 Compressed air bar 6

Specifications Motor: 1HP, 1Ph, 115/230V, Prewired 115V, 15/7.5 Amps Base Size: 13-3/8” x 20” Chuck Distance to Base: 43-13/32” Chuck Distance to Table: 24-1/2” Chuck Size: 5/8” Column Diameter: 3-1/8” Drilling Capacity: 5/8” Fence Size: 19-13/16” L x 2-11/16” H Number of Spindle Speeds : Variable Spindle Distance to Base: 46-1/4” Spindle Distance to Table (Max.): 27-3/8” Spindle Speed Range (RPM) : 250-3000 Spindle Taper : MT-2/JT-3 Spindle Travel: 6” Swing: 18” Table Size (L x W): 20” x 14” Table Tilt (Deg.) : 0 to 90 Net Weight: 266 lbs

CBC.P SPECIFICATIONS Automatic Feeding speed 23 ft/min Panel thickness Min/Max 13/32” - 1 31/32” Max Pre-milling Height 1” Edgebanding thickness 0.0157" - 0.118" Glue Pot Capacity 3.3lbs Max Edgebanding Height 2" Minimum panel width 3" Minimum panel length 7 7/8" Extendable Panel Support Rail Length 102" Extension table Max Width 54" Size of Dust Collector Ports 6" Minimum Dust Collection Requirements 1236 CFM Air Pressure Requirement 13.4 SCFM @ 87PSI Edgebanding coil Support Diameter 59" Recommend Glue Temperature Range 356°F - 410°F Max. machine dimensions (LxWxH) 112”x 34”x 49” Machine dimensions w/ Caster Wheel (LxWxH) 112"x 46-1/4"x 56" Net weight 1719 LBS Shipping dimensions (LxWxH) 86” x 36” x 57” Glue Type Granulated Hot-Melt EVA / PUR Electrical Information 1 Phase 220V 30 Amps 60Hz 1 Phase 220V 30 Amps 60Hz Sound Rating 80 dB

Technical Information Eletrical specs 1 Phase 110V 1500W 60Hz Dual Motor Specs 24 V 10 AMPS Manual Feeding speed 0-26 FT/MIN Max Edgebanding Height 3" Edgebanding coil Support Diameter 19 1/2" Edgebanding thickness 0.4 - 2 MM Edgebanding Material Melamine /PVC/ABS/PP/ VEENER non-fleeced Glue Pot Capacity 1.5 Lbs Recommend Glue Temperature Range 130 - 180°C Glue Pot Tape Granulated Hot-Melt (Extensions open) Machine dimensions (LxWxH) (101 3/4") 58" x 43" x 43" Shipping Dimensions (LxWxH) 47 x 30 x 50 Weight 330 lbs

Technical Information CBC.MR Electrical specs 1 Phase 110 V 1500 W 60Hz Motor specs 24 V 10 Amp Manual Feeding Speed 0 - 26ft/min Max edgebanding Height 3" Edgebanding Coil Support Diameter 19 1/2" Tape Thickness 0.4 - 2mm Edgebanding Material Melamine /PVC/ABS/PP/ VEENER non-fleeced Glue Pot Capacity 1.5 lbs Recommended Glue Temperature Range 130° to 180º C Glue Pot Tape Granulated Hot-Melt (Extensions) Machine Dimension LxWxH (101 3/4") 48 1/2" x 35 1/2" x 43" Shipping Dimension 43" x 30" x 50" Weight 240 Lbs.

Technical Information CBC.E Electrical specs 1 Phase 110 V 1500 W 60Hz Motor specs 24 V 10 Amp Manual Feeding Speed 18ft/min Max edgebanding Height 3" Edgebanding Coil Support Diameter 19 1/2" Tape Thickness 0.4 - 2mm Edgebanding Material Melamine /PVC/ABS/PP/ VEENER non-fleeced Glue Pot Capacity 1.5 lbs Recommended Glue Temperature Range 130° to 180º C Glue Pot Tape Granulated Hot-Melt Max. Machine Dimension 47" x 31" x 42" Shipping Dimension 32" x 22" x 20" Weight 114 Lbs.

Technical Information CBC FLEX Glue Granulated Hot-Melt Glue Temperature 130° to 180º C Motor specs 1 Phase 127 V 5.5 A 700 W Tape thickness 0.3 mm – 1 mm Max. tape width 0-35/64” to 1-57/64” Feeder speed 0 to 19 ft/min Weight 21 Lbs

Technical Information PHM.30 Driver Bit Angled 4° Angle Power 1PH -127 v Height 42.5" Router Bosch 2.25 Hp 16 amp Drill Router Bosch 1.0 Hp 12 amp Router Bit 3/8” bit 1/4’’ shank 2 Drill Bit 1/8” – 2 3/4” Wood Thickness Limit 1/2” – 1-9/16” Adjustable Fence Yes Dust Port 4’’ Air Pressure 85 psi Footprint 25” x 30” x 42 1/2" Laser Guide Yes Speed Control Yes Dual Sided Top Yes – Smooth & Textured Depth Gauge Yes – MM & Inches Weight 174 Lbs

12-Inch Benchtop Variable-Speed Drill Press (JWDP-12)Stock Number JT9-716000 Chuck Size (In.) 5/8 Column Diameter (In.) 2-1/2 Model Number JWDP-12 Motor Amps 5 Motor Power (HP) 1/2 Prop 65 Cancer and Reproductive Harm Spindle Distance to Base (In.) 23-3/8 Spindle Distance to Table (Max.) (In.) 17 Spindle Travel (In.) 3-1/8 Swing (In.) 12 Weight (Lbs.) 85