Minimax

With gluing of the panel edge, also with edging solid wood strips up to 5 mm thickness, offers the “very best” performance in edge banders at this level. The features, coupled to its ease-of-use, makes it the perfect edge bander for small woodworking, furniture and panel processing companies. Technical Data • Work table dimensions mm 3000 x 525 • Min. ÷ max. thickness of rolled edges mm 0,4 ÷ 3 • Max. thickness of edges in strips mm 5 • Min. ÷ max. panel height mm 8 ÷ 50 • Min. panel length/width mm 190/110 • Min. panel length/width with end cutting/rounding unit mm 120/110 • Feed speed

Further enhanced compared to its predecessor with the new end cutting-rounding unit. This new unit allows further processing, saving a substantial amount of time with an ease of processing. This technological solution is unique in its category, where such operations are normally a feature of more expensive and higher level machinery. Technical Data 1ph 10" EYE-S touch screen control Units: Dual pre-mil combined End trim and Corner rounding Top/bottom trim • Work table dimensions mm 3000 x 525 • Min. ÷ max. thickness of rolled edges mm 0,4 ÷ 3 • Max. thickness of edges in strips mm 5 • Min. ÷ max. panel height mm 8 ÷ 50 • Min. panel length/width mm 190/110 • Min. panel length/width with end cutting/rounding unit mm 120/110

Technical data Minimax AD 21 Max. panel width 833 / 32.75 mm / inches Worktable dimensions 905 x 372 / 35.6 x 14.6 mm / inches Worktable height 900 / 35.5 mm / inches Max. tool diameter 40 / 1.57 mm / inches Min. – max. panel height 10 – 85 / .375 – 3.25 mm / inches Spindle speed 2800 rpm # of Spindles 21 # Spindle Spacing (center-to-center) 32 mm

Universal combined machine with all minimax quality, at the most affordable price, ideal for demanding hobbyists and crafts woodworking workshops. A universal combination machine with all of the Minimax quality at a more affordable price, ideal for the D.I.Y. woodworkers and the small joinery workshops. The most compact 4-in-1 combination machine available, the Minimax C 26G is ideal for the hobbyist who works primarily with solid wood and is looking for a better alternative to tools like a jobsite saw, benchtop lunchbox jointer, benchtop planer, and router table. The Minimax C 26G comes standard with 2.5hp motors, 10″ sawblade capacity, 2-speed shaper, 10” Tersa jointer/planer cutterhead, and mobility kit. – 4′ Sliding table saw with 10″ main blade – 3x 2.5 Horsepower single-phase motors – 10” Jointer/Planer cutterhead with Tersa knives – Anodized aluminum sliding table with hardened steel ways – Eccentric workpiece clamp – Adjustable and removable riving knife – Outrigger/Squaring frame included (not pictured) – Tool set and operator’s manual

Machine Specs: • Cutterhead Working Width: 300mm (13") • Jointer Bed Length: 1200mm (47") • Maximum Sawblade Diameter: 250mm (10") • Sawblade Arbor Size: 16mm (5/8") • Cutting Width on Parallel Fence (Rip Capacity): 540mm (21") • Spindle Molder Speed: 4000 RPM/6500 RPM

The Minimax CU 410ES is a heavy duty, 3-phase, five function full combination machine designed to meet the needs of the most demanding environments. It features cast iron tables, tilting fence and breakthrough XYLENT technology. This technology gives an exacting finish while reducing ambient noise decibel output significantly. – 8 Horsepower motor, 3-phase 230v – Digital-mechanical readout on planer height and shaper spindle height – LED readouts & powered movements – Wheels for machine movement – XYLENT Technology Silent Cutterhead with 66 knives – XYLENT Maintenance kit with 10 additional knife inserts – Magnetic starter with overload protection – Automatic self-braking motors – Planer has four dust protected jackscrew posts for lifting of planer table – Elite cast-iron mortiser – On/Off pushbuttons for saw, planer and shaper motors on operator side – Dial indicators for shaper and saw tilt – Separate scoring motor with external scoring blade adjustments – Double trunnions on the saw and shaper supports – ¾” dado capacity – Pre-wired powerfeeder swing arm support – Rubber coated outfeed roller – Rear tilting Interchangeable shaper spindle: 1.25” standard – 3-axis, micro-adjustable shaper fence system, with memory pins and digital readout – 8.5ft aluminum sliding table with precision guideways – Cast-iron horizontal mortiser and American-style jointer guard – Short crosscut fence with mitre gauge, eccentric workpiece clamp and trimming shoe

The Minimax CU 410E is the go-to machine for woodworkers wanting a wider jointer to process larger pieces. This full combination machine has a 16” jointer/planer incorporated into it. A large sliding table to process longer sheet goods is standard, and a tilting arbor shaper is also included. This machine is heavy-duty, but is still able to be broken down to save space in a small shop. STANDARD FEATURES – Three independent 4.8 horsepower motors, single-phase 230v – Double trunnions on both saw and shaper assemblies – Interchangeable spindle shaper: 1.25” standard – Three-axis, micro-adjustable shaper fence system – Interchangeable and spare spindle – Digital-mechanical (NON-LED) readout on planer height, shaper spindle tilt and height, saw tilt. – Automatic self-braking motor – 8.5ft aluminum sliding table with precision guideways – Cast-iron horizontal mortiser – Short crosscut fence with mitre gauge, eccentric workpiece clamp and trimming shoe – 4-knife “Tersa” jointer/planer cutterhead – American-style jointer guard – Mobility kit, wheels for machine movement **The Minimax CU 410E comes with a scoring blade and does not come with a main saw blade**

Technical data Min. ÷ max. edge thickness 0,4 ÷ 3 mm Min. ÷ max. edge height 10 ÷ 84 mm Min. ÷ max. panel height 8 ÷ 80 mm Min. panels length/width 290/50 mm Min. internal radius (concave), 0,4 mm thickness 25 mm Min. external radius (convex), 0,4 mm thickness 5 mm Feed speeds 3 - 4 - 5 - 6 - 7 - 8 m/min

Versatile and compact universal combined machine with the more advanced technological solutions for precision, reliability and safety. Entry-level machine for cabinet work. 3.4hp motors, 2-speed shaper, 3-knife Tersa cutterhead. 12″ sawblade with independently adjustable scoring and 5.5′ sliding table allows user to crosscut 4×8 panels square and efficiently. – Three independent 3.4 Horsepower motors, single-phase 230v – Independently adjusted scoring system – 5.5ft sliding table on precision ball bearings with outrigger and swing-arm – Micro-adjustable shaper fence – Miter fence and eccentric hold-down clamp – Three-knife “Tersa” quick-change cutterhead – Jointer tables open towards the machine, and away from operator – Mobility kit, wheels for machine movement

Our longest selling bandsaw, the S 45N set the bar high for quality bandsaws. This machine has 18” cast iron flywheels, and a large cast-iron table. With 12” resaw height it is also versatile to do either pattern work, or resawing operations! This machine has been a reliable tool in the Minimax lineup for over 30 years.

The precise, cost-effective and compact circular saw with tilting blade for the D.I.Y. woodworkers and small joineries. This entry-level sliding table saw, the Minimax SC 2C is a proven design based on years of experience. It is perfect for customers upgrading to their first slider from a table saw. The footprint is small, but the capacity is large. A compact chassis, powerful 3.4hp motor, and 5.5′ sliding table. A great step up from the standard American-style cabinet saw. – 5.5ft Sliding table saw with 12″ main blade – 3.4 Horsepower single-phase motor – Anodized aluminum sliding table with hardened steel ways – Micro-adjustable rip fence with cam-locking system – Telescopic crosscut fence with two flip stops – Dedicated scoring assembly independently adjustable – Eccentric workpiece clamp – External scoring adjustments – Adjustable and removable riving knife – Outfeed table extension – Outrigger support – Tool set and operator’s manual 1-phase, 3.4hp, 5.5′ sliding stroke, tilting 12″ main blade, belt driven scoring blade, 50″ rip capacity

The prefect entry-level production machine for small cabinet shops or serious hobbyists. Affordable, without compromising quality. Solid cast iron saw unit with double trunnions and independently adjustable scoring unit. Our brand new sliding table saw, the Elite series has proven itself in American cabinet shops for many years. This machine boasts a full 8.5’ stroke and features normally found on much more expensive machines, for a fraction of the cost. See for yourself why the Minimax SC 4E 8.5 foot machine stands in a class of its own. – Solid cast iron saw unit with double support trunnions – Aluminum sliding table and rail with hardened steel guide-ways – European-style rip fence with cam lock, micro-adjustable – Automatic self-braking motor – Round steel guide bar for rip fence – Double trunnions on both saw and shaper assemblies – Telescoping crosscut fence with two adjustable flip stops – An additional table on the sliding table for support of panels with large dimensions – Eccentric panel clamp – 2-position sliding table lock – Table extension on saw out-feed – Scoring blade (adjusted independently of main blade) – ¾” DADO capability – Toolset and operator’s manual – “CSA” rated electrical components

The ideal 10.5ft single-phase sliding table saw for small cabinet shops or serious hobbyists. Affordable, without compromising quality. Maximum precision and stability with the blades lifting by means of “dove-tail” guides system and the saw unit tilting by means of two, large, lateral trunnions. The Minimax SI 315ES has proven itself in American cabinet shops for many years. This machine boasts a full 10.5’ stroke, single-phase motor and features normally found on much more expensive machines, for a fraction of the cost. STANDARD FEATURES – Double-hung cast iron trunnion – 4.8Hp single-phase motor – Aluminum table and rail with hardened steel guideways – Two aluminum flip-stops on the crosscut fence – European rip fence with cam-lock, micro-adjustable – Telescoping crosscut fence with two adjustable flip stops – Automatic self-braking motor – Eccentric panel clamp – Telescoping miter gauge with fence and support panel – 2-Position sliding table lock – Dial indicator for saw blade tilt angle – Metric and standard rule on the crosscut fence – Table extension on saw out-feed – External scoring adjustments – 3/4” dado capacity – Telescoping support arm for crosscut support table – Toolset & operator’s manual – “CSA”-rated electrical component - 10.5' Slider - 12" tilting blade - 50" rip capacity - Independent scoring unit

Technical data Axes Max. panel dimensions X-Y-Z 3000 x 900 x 50 mm Min. panel dimensions X-Y-Z 300 x 90 x 10 mm Max speed X-Y axes 20 Drilling head Spindles (X axis) 2 (1+1) n. Spindles (Y axis) 2 (1+1) n. Spindles (Z axis) 7 (4X-4Y di cui uno in comune) n. Lama integrata fissa, con taglio in direzione Blade diameter 125 mm Blade thickness 6 mm Motor power 2,2 kW Spindles rotating speed 4460 giri/min Blade rotation speed 5700 giri/min

Technical data Max. edgebanding thickness 4 mm Min. - max. panel height 14 - 80 mm Min. panel length/width 200/160 mm Minimum internal radius 25 mm Variable cutters speed 9000 - 15000 rpm

Technical data T 124 Distance between centers, with copying device mm / inches 1150 / 42.25, 1120 / 44 Centers height (Swing) mm / inches 200 (400) / 7.8 (15.75) 4 chuck speeds rpm 570/1000/1850/2500 Single-phase motor Hp 2.5

Fixed Spindle Shaper The Minimax TW 45C is a 4 horsepower spindle moulder, with sliding table and a fixed spindle. It is versatile and easy to use, ideal for woodworkers and craftsmen. Featuring a standard 1.25” spindle with dual exhaust ports, T-slot on front of the table, and miter gauge for angled cuts, flip-stops and eccentric clamp. STANDARD EQUIPMENT  -Forward/ reverse-run switch  -T-Slot on front of table  -Micro-adjustable infeed and outfeed fences  -1.25” spindle standard  -Quick spindle lock for tool changes  -Dual exhaust outlets  -Tool set and manual included  -Miter gauge  -Two flip-stops  -Eccentric clamp

The vf clean air dust extractors are specially designed to work in the woodworking shops, guaranteeing a level of dust emissions lower than 0.1 mg / m3. Thanks to their compact design and the possibility to be connected to more machines, they can fully substitute the standard centralized exhaust system. • 3-phase, 6.6hp, Negative Pressure Dust Extractor, ATEX, Antistatic cartridge filters, 2×26 gallon bin, nominal air flow 1766 CFM

The right spindle moulder for demanding craftsmen and carpentries, thanks to its customization and flexibility. The minimax tw 55es is the culmination of years of experience in manufacturing quality solid wood SCM products. This 4-speed heavy duty machine is standard with both a sliding table and tilt! The slider has hardened steel guide ways and precision bearings, so it incorporates the exact technology found in our top selling sliding table saws! The hood has memory pins so if removed, it will go right back into the same position, making this shaper accurate and repeatable.

16″ Jointer/Planer • Cutterhead working width: 410 / 16 mm / inches • Max. stock removal: 5 mm • Jointer table length: 2200 / 79 mm / inches • Planer table dimensions: 410 x 775 / 16 x 30.5 mm / inches • Planer feed speeds: 6 / 12 m/min • Min. - max. planer working height: 3 - 230 / 0.12 – 9 mm / inches • Single-phase motor: 4.8 Hp • Fence Tilt: 0 – 45 degrees

The jointer/planer combination machine for the D.I.Y. woodworkers and craftsmen joineries. Fine Woodworking named our award-winning 12″ jointer/planer as “Best Overall” in its category. This machine offers premium power and precision in a compact size for any shop. With long jointer tables and sturdy fence, this machine is a quality product, made in Italy, for a value price. Find out why one of our best-selling units may be perfect for you. STANDARD FEATURES – 4.8 Horsepower single-phase motor – 12″ Jointer/planer cutterblock – 60″ Jointer table length – Precision-ground cast iron tables – American-style jointer guard – Quick-tilting jointer fence – Jointer tables open away from operator – Two independent dust collection ports – Tool set & owner’s manual Depending on the desired cutterhead, the Minimax FS 30C also comes with: – 3-knife “Tersa” quick-change cutterhead – Xylent helical cutterhead ** The Minimax FS 30C comes with an American-style spring-loaded jointer guard and does not come with the pictured European guard in the attached pictures **

Our most popular combination machine for years, this machine sets the bar higher than any other manufacturer. This machine has proven itself in American shops countrywide. This machine is available with a 5.5′ or 8.5’ sliding table, and has features normally found on much more expensive machines, for a fraction of the cost. See for yourself why the Minimax CU 300C T combination machine is the perfect solution for people who want quality equipment with a small footprint. – Three independent 4.8Hp (single-phase, 230v) motors – ¾” Dado capacity – Independently adjustable scoring blade – External scoring adjustments – Available with a 5.5′ (1600mm) or 8.5’ (2660mm) sliding table – Interchangeable shaper spindle & Micro-adjustable shaper fence – Cast iron horizontal mortiser w/ self-centering Wescott Chuck – Miter fence and eccentric hold-down clamp – Three-knife “Tersa” quick-change cutterhead – Separate Jointer Fence – Outrigger and Swing Arm – Mobility kit – Automatic self-braking motor

Technical data fs 41e Cutterhead working width mm / inches 410 / 16 With TERSA Straight-knife Cutterhead: Cutterblock diameter / no° of standard knives Dimension of standard knives mm / n° mm 87 / 3 410 x 30 x 3 With XYLENT Spiral helical Cutterhead: Cutterblock diameter / no° of standard knives Dimension of standard knives mm / n° mm 87 / 66 15 x 15 x 2.5 Max. stock removal mm 5 Jointer table length mm / inches 2200 / 79 Planer table dimensions mm / inches 410 x 775 / 16 x 30.5 Planer feed speeds m/min 6 / 12 Min. - max. planer working height mm / inches 3 - 230 / 0.12 - 9 Single-phase motor Hp 4.8 Fence Tilt degrees 0 - 45