Saws
Filters
-
Filters : Clear all
Sort by:
Sort by:
Most Popular
Most Popular
Most Recent
Price: High to Low
Price: Low to High
A to Z
Z to A
SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch. UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability.
The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0.010” maximum gap. DUST COLLECTION: 99% dust collection is delivered above the table with the available dust collection blade guard (Model # TSG-DC, sold separately), and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4” port. RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe.
$5,154.00 - $6,618.00
$5,154.00
$5,272.00
$5,822.00
$5,940.00
$5,822.00
$5,940.00
$5,822.00
$5,940.00
$6,500.00
$6,618.00
$6,500.00
SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch. UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. Poly v-ribbed belts reduce vibration and help ensure a great cut. Table flatness is measured diagonally at 0. 010” maximum gap. RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe. CONFIGURABILITY: Over 150 unique configurations, makes the Contractor Saw the most configurable SawStop saw. Adding a mobile base, sliding crosscut table or router table, are just a few of the ways to make this your ideal saw. UNIVERSAL PERFORMANCE: The Contractor Saw offers versatility, reliability and safety for a variety of users. The cast iron table top (Cast Iron Wing Assembly, CNS-CIWA, sold separately) creates a better-than-hybrid performance in the shop at an affordable price. 36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection. • Horsepower 1.75hp • Phase 1 phase • Voltage 110v
$1,999.00 - $2,435.00
$1,999.00
$2,329.00
$2,435.00
The NOVA SI 400 is the best seller of its category. Precise, cost effective and compact tilting blade circular saw, ideal for small spaces and for those who do not want to give up the reliability of SCM joinery machines. A notable feature is the presence of the scoring unit, which can be conveniently adjusted from the outside of the machine, as well as an amazing cut of both thick solid wood and even melamine-faced panels, with the saw unit having a maximum blade diameter of 400 mm (15.75”) with the scoring blade mounted.
$15,475.00
Machine Specs: • Worktable Dimension: 600mm x 885mm • Cast Iron Saw Wheels Diameter: 640mm • Saw Wheel Width: 38mm • Maximum Cutting Height: 600mm (24″) • Maximum Cutting Width: 620mm • Worktable Tilting (CE): 0° – 45° (20°) • Exhaust Outlet Diameter: N° 2mm x 120mm • Voltage: 220V 1-phase, 4.8hp, 25.2″ flywheels dia. , 23.6″ resaw height, 24.4″ cutting width, 204″ recommended blade length, .25″ – 1.5″ blade
$9,475.00
Technical Specifications Worktable dimensions: 600 x 885 mm Diameter of cast iron saw wheels: 640 mm Saw wheels width: 38 mm Max. cutting height: 600 mm / 24″ Max. cutting width: 620 mm / 25″ Tilt of worktable: 0° / 20° Min./max. saw blade dimensions: 8 mm / 35 mm Standard single-phase motor S1 220V: 2.2kW (3hp) 50Hz Standard three-phase motor S1 400V 50Hz: 3kW (4hp) 50Hz Exhaust outlet diameter: 2 x 120mm 3-phase, 9hp, 25.2″ flywheels dia., 23.6″ resaw height, 24.4″ cutting width, 204″ recommended blade length, .25″ – 1.5″ blade widt
$9,975.00
Technical Specifications Motor 3-phase 230v 6.6Hp Flywheel Diameter 29” (740mm) Table Size 28.34” x 39.37” (720x 1000mm) Table Tilt 0° -45 Cutting Height/Depth 17.7” (450mm) Cutting Width 28.34” (720mm) Min Blade Length 210.23” (5340mm) Max Blade Length 213.38” (5420mm) Overall Dimensions(Used Upright/Vertically) 46.4” x 28.3” x 104.3” (118x 72x 265cm) Net Weight 992lbs (450 kg) Total Dust Extraction Ports: 2 Total Dust Extraction Ports Diameter4.72” (120mm) 3-phase, 6.6hp, 29″ flywheel dia., 17.7″ resaw height, 28.34″ cutting width, 212″ recommended blade length, .31″ – 1.5″ blade width
$10,185.00
Technical Specifications Motor 3-phase 230v Horsepower 9Hp Flywheel Diameter37” (940mm) Table Size32.28” x 45.66” (820x 1160mm) Table Tilt0° -45°Cutting Height/Depth22” (560mm)Cutting Width36.2” (920mm) MinBlade Length259.44” (6590mm) Max Blade Length264.17” (6710mm) Overall Dimensions(Used Upright/Vertically)61” x 36.2” x 112.59” (155x 92x 286cm) Net Weight1,584 lbs.(720kg) Total Dust Extraction Ports2 Total Dust Extraction Ports Diameter5.5” (140mm)
$15,185.00
The advantages of an exclusive choice. Buying a “L’invincibile six” machine means you get a customized solution, thanks to experience, technical research and Italian creativity. Console eye-S main functions: – connectivity among machines belonging to the same company network and 4.0 Industry preset – sharing of work programs and tools database – activity monitoring and reporting on the use of the machine – connectivity with SCM Thundercut (optimizer/sequencer App) – self-diagnosis, tele-service and link to troubleshooting
$65,975.00
Maggi radial arm saws offer adaptability, versatility, precision and durability to shops of all sizes. Maggi has been producing radial arm saws since 1973 and over the years has continually improved technical design and quality. Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. European quality made to last! 4 HP, 2800 RPM motor 400 mm (15.75") Blade diameter capacity (Not included) 30 mm Arbor diameter 73.23" x 45.08" Table size 27.75" Max crosscut length on 3/4" thick material (90 deg) 0 to 40.5" Rip capacity 4.9" Max depth of cut 19.68" Max cut length at 45 deg on right side 12.20" Max cut length at 45 deg on left side Dust chute on blade guard as well as rear of table Machine weight: 495 Lbs. Machine dimensions: 73" x 62" x 61" T Crated dimensions: 56" x 34" x 24" T Crated weight: 523 Lbs. Voltage: 230V 3-Phase
$6,550.00
Our longest selling bandsaw, the S 45N set the bar high for quality bandsaws. This machine has 18” cast iron flywheels, and a large cast-iron table. With 12” resaw height it is also versatile to do either pattern work, or resawing operations! This machine has been a reliable tool in the Minimax lineup for over 30 years.
$3,975.00
The minimax sc 2c is a precise, compact and with a low investment circular saw with tilting blade, ideal for small spaces and for those who do not want to give up the reliability of SCM joinery machines.
An important feature is the presence of the scoring unit, which can be easily adjusted from the outside of the machine, as well as a surprising cut of both thick solid wood and even upgraded panels, with the saw unit with a 315mm (12.37”)maximum diameter blade which guarantees a 100mm cutting height with installed scorer.
An important feature is the presence of the scoring unit, which can be easily adjusted from the outside of the machine, as well as a surprising cut of both thick solid wood and even upgraded panels, with the saw unit with a 315mm (12.37”)maximum diameter blade which guarantees a 100mm cutting height with installed scorer.
$6,475.00
The sc 4e is a circular saw with tilting blade for demanding craftsmen and woodworkers which combines working accuracy with ease of use and saving.
The perfect entry-level production machine for small cabinet shops. Affordable, without compromising quality. Solid cast iron saw unit tilting on double trunnions and adjustable scoring unit from the outside of the machine.
A perfect cut result is guaranteed by the saw unit constituted by a mighty, cast iron structure. This machine boasts a full 8.5’ stroke, and features normally found on much more expensive machines, for a fraction of the cost.
$10,975.00
The SI 315es is a top performances joinery machine: cast iron saw unit with 315 mm 12.37” saw blade and scoring unit with independent motor. It provides the best support in all machinings, thanks to the 360 mm (14.19”) width sliding table. Guaranteed maximum accuracy and stability with the blades lifting by means of “dove-tail” guides system and the saw unit tilting by means of two, large, lateral trunnions.
This machine is equipped with a top quality 4.8 horsepower motor for large businesses and smaller workshops with single-phase power.
$12,775.00
Specifications: Motor: 3 HP, 1 PH, 12A, 230 V, Prewired 230 V Cutting Capacity Width: 14-1/2” Cutting Capacity Height: 14″ Blade Width: 1/8″ to 1″ Blade Speed: 3100 SFPM Blade Length: 153″ Table Dimension (LxW): 21-1/2” x 16″ Table Tilt: 10 ° left, 45 ° right Table Height from Floor: 40″ Table Height at 90 degrees: 40″ Miter Gauge Positive Stops: 45 degree, 90 degree Dust Port Outer Diameter: 4″ Dust Collection Minimum CFM: 600 cu.ft/min Thickness Capacity (max): 14″ Wheel Diameter: 15″ Dimensions: 83-1/2” H x 27-1/2” W x 29-3/4” L
$4,179.00
The PWBS-14CS Bandsaw has an extra large, two-piece cast iron table. It consists of a 15 x 15″ tilting section and a fixed 15″ x 5″ extension for a total working surface area of 15″ x 20″. A balanced, nine-spoke cast iron wheel makes for smooth blade travel, and a Carter™ quick tension release lever makes blade changing easy. A micro-adjustable dual bearing blade guide system is featured above and below the table, as well as a work lamp and chip blower. A Poly-V belt maximizes power transmission while minimizing noise and vibration. It has full 6″ under guide capacity with 13-1/2″ frame to blade clearance. The aluminum rip fence comes with a resaw attachment.
$1,979.00
The class si 400ep circular saw represents a great example of superior technology combined with an ease of use.
The “Ready” control gives to the user the practical advantage for automatic control of the main positions. The programming of the work becomes simple and effective with the electronic control with a 4” LCD dispaly. The working mode can be manual, semi-automatic and automatic with a memory capacity of up to 99 programs. The tool data setting has automatic height adjustment. This control panel includes a calculator and hour counter.
$36,975.00
Guaranteed quality at your fingertips!
Essential configuration with complete equipment to carry out professional machining. Maximum torsional rigidity and the total absence of vibration through the closed loop structure of the saw unit which ensures perfect alignment of the blades during tilted and difficult cuts. The wide section of the carriage, with closed reticular geometry provides extreme rigidity and minimum deflection. A smooth operating motion is guaranteed over time by the system of sliding bearings running on hardened steel guides using an exclusive method of mechanical fixing.
Essential configuration with complete equipment to carry out professional machining. Maximum torsional rigidity and the total absence of vibration through the closed loop structure of the saw unit which ensures perfect alignment of the blades during tilted and difficult cuts. The wide section of the carriage, with closed reticular geometry provides extreme rigidity and minimum deflection. A smooth operating motion is guaranteed over time by the system of sliding bearings running on hardened steel guides using an exclusive method of mechanical fixing.
$14,475.00
SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch. UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0. 010” maximum gap. DUST COLLECTION: 99% dust collection is delivered above the table with the included dust collection blade guard, and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4” port. RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe.
$3,025.00 - $3,987.00
$3,025.00
$3,355.00
$3,461.00
$3,551.00
$3,659.00
$3,987.00
Powermatic ArmorGlide PM1500T Bandsaw, 3HP, 1PH, 230V 1791500T Blade Speed: 3100 SFPM Cutting Capacity Width: 14-1/2'' Cutting Capacity Height: 14'' Blade Width: 1/8'' - 1'' Maximum Saw Blade Width: 1'' Table Size: 21-1/2'' x 16'' Table Height from Floor: 40'' Table Tilt (Deg.): 10 Left, 45 Right Table T-Slot: 3/4'' Minimum Saw Blade Width (In.): 1/8 Miter Gauge Positive Stops: 45, 90 Dust Collection Minimum CFM Required (CFM): 600 Motor Voltage: 230V Prewired Voltage: 230V Motor Current (Amps): 12 Motor Horsepower: 3 ArmorGlide Coating: Yes
$3,999.99
CSA Certified Motor: 7.5HP, 3PH, 230/460V, 18.4/9.2A L x W x H (In.): 48 x 38 x 43 Net Weight (lbs): 738 lbs. Gross Weight (lbs): 831 lbs. Style: Cabinet Saw Prewired Voltage (V.): 230 Table Height from Floor (In.): 35-1/4 Maximum Diameter of Dado (In.): 8 Arbor Speed (RPM): 4500 Maximum Rip Left of Blade (In.) 14 Table Size (In.): 26 x 38 Maximum Width of Dado (In.): 13/16 Blade Diameter (In.): 14 Table Type: Cast Iron Maximum Rip Right of Blade (In.): 50 Dust Port Outside Diameter (In.): 4 Table T-Slot (In.): 3/4 x 3/8 Arbor Diameter (In.): 1 Recommended Circuit Size (Amps.): 30 Dust Collection Minimum CFM Required (CFM): 600 Table Size with Extensions (In.): 48 x 38 Maximum Depth of Cut at 90 Degrees (In.): 5-1/8 Maximum Depth of Cut at 45 Degrees (In.): 3-1/2 Table in Front of Saw Blade at Maximum Depth of Cut (In.): 15-1/2
$7,622.00
Specifications: Motor: 3HP, 1PH, 230V, 14.5A L x W x H (In.): 84.75 x 39.5 x 40.5 Net Weight (lbs): 629 lbs. Gross Weight (lbs): 704 lbs. Style: Cabinet Saw Table Height from Floor (In.): 35 Maximum Diameter of Dado (In.): 8 Arbor Speed (RPM): 4500 Maximum Rip Left of Blade (In.): 13-1/2 Table Size (In.): 22 x 30-1/2 Maximum Width of Dado (In.): 13/16 Blade Diameter (In.): 10 Table Type: Cast Iron Maximum Rip Right of Blade (In.): 50 Dust Port Outside Diameter (In.): 4 Table T-Slot (In.): 3/4 x 3/8 Arbor Diameter (In.): 5/8 Recommended Circuit Size (Amps.): 20 Dust Collection Minimum CFM Required (CFM): 400 Table Size with Extensions (In.): 42 x 30-1/2 Maximum Depth of Cut at 90 Degrees (In.): 3-1/8 Maximum Depth of Cut at 45 Degrees (In.): 2-1/8 Table in Front of Saw Blade at Maximum Depth of Cut (In.): 11-1/4
$5,433.00
Specifications: Motor: 3 HP Motor Power: 230V Motor Phase: 1 PH single phase Amps: 4.9 Arbor Diameter: 5/8" Arbor Speed: 4500 RPM Blade Diameter: 10" Dust Collection Minimum: 400 CFM Dust Port O.D.: 4" Maximum Depth of Cut at 45 Degree: 2-1/8" Maximum Depth of Cut: 2-1/8 or 3-1/8" Maximum Diameter of Dado: 8" Maximum Rip Left of Blade:13-1/2" Maximum Rip Right of Blade: 50" Maximum Width of Dado: 13/16 T-Slot with Stops Table Type: Cast Iron 50" Rip Fence Router Lift Net Weight: 690 lbs. Ship Weight: 719 lbs. Overall Dimensions: Shipping 84-3/4"L x 39-1/8"W x 40-3/8" H Table Height from Floor: 35" Table in Front of Saw Blade at Maximum Depth of Cut: 10" Table Size: 30-1/2" L x 22" W Recommended Circuit Size: 20 Amp
$5,774.00
specification: Router Lift Included Motor: 5HP, 1PH, 230V, 21A L x W x H (In.): 84.75 x 39.5 x 40.5 Net Weight (lbs): 662 lbs. Gross Weight (lbs): 739 lbs. Style: Cabinet Saw Table Height from Floor (In.): 35 Maximum Diameter of Dado (In.): 8 Arbor Speed (RPM): 4500 Maximum Rip Left of Blade (In.): 13-1/2 Table Size (In.): 22 x 30-1/2 Maximum Width of Dado (In.): 13/16 Blade Diameter (In.): 10 Table Type: Cast Iron Maximum Rip Right of Blade (In.): 50 Dust Port Outside Diameter (In.): 4 Table T-Slot (In.): 3/4 x 3/8 Arbor Diameter (In.): 5/8 Recommended Circuit Size (Amps.): 30 Dust Collection Minimum CFM Required (CFM): 400 Table Size with Extensions (In.): 42 x 30-1/2 Maximum Depth of Cut at 90 Degrees (In.): 3-1/8 Maximum Depth of Cut at 45 Degrees (In.): 2-1/8 Table in Front of Saw Blade at Maximum Depth of Cut (In.): 11-1/4
$6,687.00
Specification: Motor: 5HP, 3PH, 230/460V, 13/6.5A L x W x H (In.): 84.75 x 39.5 x 40.5 Net Weight (lbs): 662 lbs. Gross Weight (lbs): 739 lbs. Style: Cabinet Saw Prewired Voltage (V.): 230 Table Height from Floor (In.): 35 Maximum Diameter of Dado (In.): 8 Arbor Speed (RPM): 4500 Maximum Rip Left of Blade (In.): 13-1/2 Table Size (In.): 22 x 30-1/2 Maximum Width of Dado (In.): 13/16 Blade Diameter (In.): 10 Table Type: Cast Iron Maximum Rip Right of Blade (In.): 50 Dust Port Outside Diameter (In.): 4 Table T-Slot (In.): 3/4 x 3/8 Arbor Diameter (In.): 5/8 Recommended Circuit Size (Amps.): 20 Dust Collection Minimum CFM Required (CFM): 400 Table Size with Extensions (In.): 42 x 30-1/2 Maximum Depth of Cut at 90 Degrees (In.): 3-1/8 Maximum Depth of Cut at 45 Degrees (In.): 2-1/8 Table in Front of Saw Blade at Maximum Depth of Cut (In.): 11-1/4
$6,973.00
specification: Motor: 5HP, 3PH, 230/460V, 13/6.5A L x W x H (In.): 84.75 x 39.5 x 40.5 Net Weight (lbs): 644 lbs. Gross Weight (lbs): 719 lbs. Style: Cabinet Saw Prewired Voltage (V.): 230 Table Height from Floor (In.): 35 Maximum Diameter of Dado (In.): 8 Arbor Speed (RPM): 4500 Maximum Rip Left of Blade (In.): 13-1/2 Table Size (In.): 22 x 30-1/2 Maximum Width of Dado (In.): 13/16 Blade Diameter (In.): 10 Table Type: Cast Iron Maximum Rip Right of Blade (In.): 50 Dust Port Outside Diameter (In.): 4 Table T-Slot (In.): 3/4 x 3/8 Arbor Diameter (In.): 5/8 Recommended Circuit Size (Amps.): 20 Dust Collection Minimum CFM Required (CFM): 400 Table Size with Extensions (In.): 42 x 30-1/2 Maximum Depth of Cut at 90 Degrees (In.): 3-1/8 Maximum Depth of Cut at 45 Degrees (In.): 2-1/8 Table in Front of Saw Blade at Maximum Depth of Cut (In.): 11-1/4
$6,346.00
$5,092.00 - $6,764.00
$5,785.00
$5,994.00
$5,752.00
$6,764.00
$5,092.00
$6,225.00
$6,999.99 - $9,459.00
$6,999.99
$8,029.00
$8,469.00
$8,698.00
$9,151.00
$9,459.00
$2,543.99 - $3,013.00
$3,013.00
$2,543.99
$3,299.00 - $3,519.00
$3,299.00
$3,519.00
Specifications: Power: 1-3/4 HP Voltage: 115 Volt (prewired) / 230V Recommended Circuit Size: 20A Motor Phase: 1 Phase Motor Speed: 1720 RPM Power Transfer: V-belt Power Cord and Plug: SJT 14AWGx3C, 6 ft., 5-15P plug Recommended Circuit Size: 20A (for 115V), 15A (for 230V) Sound Emission without Load: 75 dB at 3 ft. (900 mm) from blade Bandsaw Nominal Size: 14" Bandsaw Wheel Diameter: 14" Blade Length: 116" Blade Width: 1/8" to 3/4" Cutting Capacity: 12" W; 13.3" H Blade Speed: 3,000 SFPM Wheel Speed: 765 RPM Table Material: Ground cast iron Table Insert Material: Anodized aluminum Table Height: 40" Table Size: 21-1/2" x 17" Table T-Slot: 3/4" (x2) Table Tilt: 45° R Stand Type: Closed Frame Material: Steel Wheels: Cast iron Tires: Polyurethane Blade guides: Ball bearings, aluminum block Resaw Fence: Extruded aluminum Resaw Fence Size (L x W x H): 18-1/4" x 6" (463 x 155 mm) Dust Collection Minimum Required: 350 CFM Dust Port: 4" Outer Diameter (x2) Overall Assembled Dimensions (L x W x H): approximately 37" x 27-1/2" x 75-3/8" Footprint (L x W): 24-7/8" x 17-3/4" Net Weight (approx.): 300 lb.
$1,599.99
Specifications: Motor Power: 1/2 HP Motor Phase: 1 Phase Motor Voltage: 115V Motor Amps: 3.4A Band Saw Size/Wheel Diameter: 10" Cutting Capacity - Width: 9-1/2" Cutting Capacity - Height: 4-1/8" Maximum Rip Left of Blade with Fence: 5" (125 mm) Maximum Rip Right of Blade w/Fence: 5" (125 mm) Blade Length: 67-1/2" Blade Speed: 2750 SFPM Overall Dimensions without Stand (L x W x H): 27" x 18" x 33" (686 x 457 x 838 mm) Overall Dimensions with Stand (L x W x H): 30" x 19-1/2" x 59-1/2" (762 x 496 x 1511 mm) Table Size (L x W): 13-1/8" L x 13-3/8" Table Size with Extension (L x W): 13-1/8" x 19" Table Tilt: 0° to 45° Maximum Saw Blade Width: 1/2" Minimum Saw Blade Width: 1/8" Table Height from Floor: 41-1/2" Dust Port Outside Diameter: 4" Net Weight: approximately 83 lbs. (36.4 kg) Stand Type: Open
$599.99
Double Mitre Saw for "V" cutting and Picture Frames. Two 14" saw blades, 3 1/2" width capacity. Last generation vertical Double Mitre Saw from OMGA, the V 235 is the result of 30 years of experience in this field. This compact and powerful system counts with all features and patented devices that OMGA designed throughout the years, such as the ProfilBlock clamping system or the popular patented Scaled Tables to name a few. The vertical travel system along with its 2 powerful 2 HP motors, make of the V 235 the perfect choice for accuracy and toughness in a variety of application for the picture frame, cabinet and millwork industries. Because of its versatility the V 235 is well suited to be connected with our OMGA Stop TM creating a truly integrated system which can be configured in a variety of levels of automation to fulfill the most demanding mitering tasks. Optional equipment such as Scaled Table Extensions, Dust collecting Systems, additional Moveable Stops, Aluminum version Kit and others, can be added to further complete the standard machine.
$22,019.00
• Wheels and a folding stand provide portability for your compact panel saw and allow you to move it around your shop as you see fit. • Standard Equipment: - 3 ¼ Hp, 15 amp industrial, Milwaukee Tool motor. - Folding Stand - Wheels - Zinc plated 1 ¾” steel guide tubes. - 4 Nylatron roller bearing systems. - Adjustable vertical and horizontal rulers. - Quick change from vertical to horizontal cutting. - Thin material pressure guard. - Injection-molded plastic material rollers. - Spring loaded counter balance system. - Integrated dust collection bonnet. - Extended warranty. - TUV certified to UL/CSA standards
$2,199.00
The C4 model packs all of the features of the full-size saws into a portable 5′ frame and features a 50″ maximum crosscut. The maximum cutting height on the C5 Panel Saw is 64″, both machines include a Milwaukee Tool motor and have no differences besides the maximum cutting height. The C4 is designed for customers who have limited floor space or require transporting the saw to the work site. Photos are shown shown with a stand and wheels, which are optional accessories.
$2,499.00 - $2,585.00
$2,499.00
$2,585.00
•The C5 portable panel saw features a 64″ maximum crosscut and cuts material up to 1.75″ thick. •This panel saw can travel to work sites and fit into shops with limited floor space. The only difference between this machine and the C4 Panel saw are the maximum crosscut lengths. •Standard Equipment: - Zinc plated 1 ¾” steel guide tubes. - Milwaukee Tool motor - 4 Nylatron roller bearing systems. - Adjustable vertical and horizontal rulers. - Quick change from vertical to horizontal cutting. - Thin material pressure guard. - Injection-molded plastic material rollers. - Spring loaded counter balance system. - Integrated dust collection bonnet. - Extended warranty. - TUV certified to UL/CSA standards
$2,569.00 - $2,685.00
$2,569.00
$2,685.00
•Featuring a 10′ frame, and 50″maximum crosscut with an unlimited rip cut, this panel saw is a preferred solution for cutting 4′ X 8′ sheets of plywood. The H4 panel saw cuts within 1/32″ on a wide variety of panel materials up to 1¾” thick. •The H4 offers full-sized vertical panel saw productivity in economical machines. H-Series saws are used in all kinds of panel processing applications. •Standard Equipment: - 3 ¼ Hp, 15 amp industrial duty saw motor. - Zinc plated 1 ¾”steel guide tubes. - 4 Nylatron roller bearing systems. - Adjustable vertical and horizontal rulers. - Quick change from vertical to horizontal cutting. - Thin material pressure guard. - Injection-molded plastic material rollers. - Spring loaded counter balance system. - Integrated dust collection bonnet. - Extended warranty. - TUV certified to UL/CSA standards
$3,699.00 - $3,735.00
$3,699.00
$3,735.00
• Our flagship H5 panel saws are ideally suited for customers looking for a full sized vertical panel saw at a very affordable price. This saw has a crosscutting height of 64″ while delivering an accuracy of 1/32″ straight and square. The only difference between this model and our H4 and H6 models are that the they provide 50″, and 74″ maximum crosscuts. • Standard Equipment - Zinc plated 1 ¾”steel guide tubes. - Milwaukee Tool motor - 4 Nylatron roller bearing systems. - Adjustable vertical and horizontal rulers. - Quick change from vertical to horizontal cutting. - Thin material pressure guard. - Injection-molded plastic material rollers. - Spring loaded counter balance system. - Integrated dust collection bonnet. - Extended warranty. - TUV certified to UL/CSA standards
$3,799.00 - $3,835.00
$3,799.00
$3,835.00
• The H6 Panel Saw provide a 74″ crosscut, ideal for cutting a 10′ X 6′ piece of material, up to 1.75″ thick while only occupying 30 square feet of floor space. A motor made by Milwaukee Tool is currently used on the H6 vertical saw. • Standard Equipment - Zinc plated 1¾”steel guide tubes. - 4 Nylatron roller bearing systems. - Milwaukee Tool Motor - Adjustable vertical and horizontal rulers. - Quick change from vertical to horizontal cutting. - Thin material pressure guard. - Injection-molded plastic material rollers. - Spring loaded counter balance system. - Integrated dust collection bonnet. - Extended warranty. - TUV certified to UL/CSA standards
$4,049.00 - $4,259.00
$4,049.00
$4,259.00
• The 6400 provides a 64″ maximum crosscut while the 6800 provides a 74″ maximum crosscut. The maximum ripcut (horizontal) is dependent on pushing the panel through. • Standard Equipment: - 3 Hp worm driven heavy-duty saw motor. - 10 ft. welded steel frame. - Chrome-plated 1 3/4″ guide tubes. - 8 Nylatron roller bearing systems. - Adjustable vertical and horizontal rulers. - Quick change from vertical to horizontal cutting. - Thin material pressure guard. - Solid aluminum material rollers. - Enclosed counterweight system. - Integrated dust collection bonnet. - TUV certified to UL/CSA standards.
$5,999.00
• Featuring a heavy duty worm drive motor, additional steel frame supports, aluminum wheels and double bearings, this machine will deliver an accuracy of 1/64″. The 6800 can cut sheets up to 74″ without blinking an eye. • Standard Equipment: - 3 Hp worm driven heavy-duty saw motor. - 10 ft. welded steel frame. - Chrome-plated 1 3/4″ guide tubes. - 8 Nylatron roller bearing systems. - Adjustable vertical and horizontal rulers. - Quick change from vertical to horizontal cutting. - Thin material pressure guard. - Solid aluminum material rollers. - Enclosed counterweight system. - Integrated dust collection bonnet. - TUV certified to UL/CSA standards.
$6,799.00
• The EF5 Vertical Panel Saw is designed for businesses cutting up to 8 hours daily, with multiple operators cutting throughout the day. The maximum crosscut on the EF5 is 64″, with a 1.75″ cut depth, and unlimited length ripcut. It includes a dust collection kit, upgraded aluminum rollers, and additional steel welded at a diagonal plane. The EF5 includes dust collection and is ready to connect to your vacuum of choice. • The smart, servo motor on the EF5 has been rigorously tested for several years by our engineers, and a few customers using several of our vertical panel saws in day-to-day operations. Our customers were instrumental in identifying changes along the multi-year process of developing this machine. It continuously performed in high usage settings with multiple operators, cutting continuously throughout the day. The motor is capable of being set between 500 and 5,500 revolutions per minute (RPM) and precise cuts can depend on appropriately setting the RPM.
$7,299.00
•Heavy duty induction motors allow you to cut endlessly with an option of single or three phase power. All of our machines are built to last; the 7000 series gives you that extra motor efficiency with little to no maintenance required. Longevity within the 7000 is made possible by high induction motors supported by US precision machined components. •The 7000 Panel Saw cuts horizontally and vertically, within .015” straight and square, up to 2” thick. Shops with multiple operators and continuous cutting operations will see a strong return on investment with this machine.
$10,699.00 - $10,899.00
$10,699.00
$10,899.00
$10,899.00
• Built with many similarities as the 7000 model including high induction motors, key upgrades on the 7400 & 7400XL include:
-Rigid beams and rugged frame improving cut accuracy
-Our patented MID-WAY® Fence built into the machine
-22 aluminum material rollers on the 7400
-Tighter cutting tolerance of .005″
-2.125” depth of cut
-2 Hp - 1 Phase - 230V
-3 Hp - 3 Phase - 230V
-3 Hp - 3 Phase - 460V
$13,349.00 - $13,549.00
$13,349.00
$13,549.00
$13,549.00
• High production panel processing is now a reality. Cut material 2 1/8″ deep for 8+ hours per day and within .005″ straight and square. Every component of this saw represents quality and performance. Featuring three different motor configurations, heavy extruded beams with precise dual-vee bearings, and the sturdiest frame on the market, these top of the line woodworking tools will boost your shops production. The 13′ frame is only difference between this machine and the 7400-M panel saw. • Standard Equipment: - Continuous usage induction saw motor. - Welded steel frame and integrated stand system. - Dual V-track precision guide system. - Adjustable vertical and horizontal rulers. - Floating pressure saw foot. - Solid aluminum material rollers. - Enclosed counterweight system. - Dust collection ready. - 3 year warranty. - TUV certified to UL/CSA standards
$14,499.00 - $14,699.00
$14,499.00
$14,699.00
$14,699.00
MAGGI JUNIOR 640 CE RADIAL ARM SAW Maggi radial arm saws offer adaptability, versatility, precision and durability to shops of all sizes. Maggi has been producing radial arm saws since 1973 and over the years has continually improved technical design and quality. Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. European quality made to last! • 3 HP, 2800 RPM motor • 400 mm (15.75") Blade diameter • 66.50" x 38.39" Table size • 21.5" Max crosscut length on 3/4" thick material • 15" Max cut length at 45 deg. On right side • 7.5" Max cut length at 45 deg. On left side • Dust chute on blade guard as well as rear of table • Machine weight: 447 Lbs. • Machine dimensions: 62" x 55" x 61" T 230 V, 1 Ph, 60 Cy Electrical; 230V 1Ph, 60Cy
$5,850.00
Maggi radial arm saws offer adaptability, versatility, precision and durability to shops of all sizes. Maggi has been producing radial arm saws since 1973 and over the years has continually improved technical design and quality. Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. European quality made to last! • 1 HP, 2800 RPM motor • 400 mm (15.75") Blade diameter • 66.50" x 38.39" Table size • 21.5" Max crosscut length on 3/4" thick material • 15" Max cut length at 45 deg. On right side • 7.5" Max cut length at 45 deg. On left side • Dust chute on blade guard as well as rear of table • Machine weight: 447 Lbs. • Machine dimensions: 62" x 55" x 61" T ELECTRICAL 230 v, 1Ph, 60Cy
$5,850.00
Technical Information Motor Specs 1 Phase 110V 15 Amp 60 Hz Diameter of wheel 14" Speed 3000 ft/min Max cutting width 13- 1/2" (345mm) Max cutting height 12" (310mm) Table size (LxW) 17- 1/4" x 21- 1/8" Blade Size 115" (2933mm) Blade Width 1/8" - 3/4" Floor-to-table height 40 - 1/4 " Dust port size 4" Footprint (LxWxH) 27" x 39" x 78"
$2,399.00
Technical Information Motor Specs 5 HP 1 phase Max Cutting Height 13" Max cutting width 15" Table Dimension 24" x 30" Wheel Diameter 24" Table Tilt 45º Table Lenght 165" Dimensions od Assembled machine 27" x 35" x 71" Weight 550 lbs
$4,499.00
Loading...
